•  Junos OS WLAN Configuration and Administration Guide
  •  Copyright and Trademark Information
  •  Table of Contents
  •   About This Guide
    •  SRX Series Documentation and Release Notes
    •  Objectives
    •  Audience
    •  Supported Routing Platforms
    •  Documentation Conventions
    •  Documentation Feedback
    •  Requesting Technical Support
  •   Overview
    •   Introduction
      •  WLAN Overview
      •  AX411 Access Point Feature Overview
      •  Understanding Wireless Client Requirements
      •  Understanding Access Point Licensing
  •   Configuration
    •   AX411 Access Point Configuration
      •  Getting Started with the Default Access Point Configuration
      •  Factory-Default Configuration
      •  AX411 Access Point Configuration Overview
    •   System and Network Settings
      •  System and Network Configuration Overview
      •  Understanding How the Access Point Obtains an IP Address
      •  Understanding Layer 2 Forwarding Operations
      •  Understanding Management VLAN Support
      •  Understanding Untagged VLAN Designation
      •  Understanding NTP Support
      •  Understanding 802.1x Authentication of the Access Point
      •  Example: Configuring Management Options (CLI)
      •  Example: Configuring Management Options (J-Web)
      •  Example: Configuring 802.1x Authentication (CLI)
      •  Example: Configuring 802.1x Authentication (J-Web)
    •   Country Code and Regulatory Domain
      •  Understanding the Country Code
      •  Understanding Regulatory Domains and IEEE 802.11d
      •  Example: Disabling Country Broadcast (CLI)
      •  Example: Disabling Country Broadcast (J-Web)
    •   Radio Settings
      •  Radio Configuration Overview
      •  Understanding Turning a Radio Off
      •  Understanding Radio Modes
      •  Understanding Power and Channel Assignment
      •  Understanding Transmit Power Allocation
      •  Understanding Channel Assignment
      •   Understanding IEEE 802.11n
        •  Radio Mode
        •  Channel Bandwidth
        •  Primary Channel (40-MHz Channel Bandwidth Only)
        •  Transmission Rates
        •  Protection
        •  Guard Interval
      •  Understanding Maximum Client Associations
      •  Understanding Beacon Intervals
      •  Understanding DTIM Period
      •  Understanding Fragmentation Threshold
      •  Understanding RTS Threshold
      •  Understanding Fixed Multicast Rate
      •  Understanding Broadcast and Multicast Rate Limiting
      •   Understanding Fixed Rate Speeds
        •  Supported Rates
        •  Basic Rates
      •  Example: Configuring Radio Settings (CLI)
      •  Example: Configuring Radio Settings (J-Web)
    •   Virtual Access Points
      •  Understanding Virtual Access Points
      •  Virtual Access Point Configuration Overview
      •  Understanding SSIDs
      •  Understanding Virtual Access Points and VLANs
      •   Understanding Client Security
        •  No Security
        •  Static WEP
        •  Dynamic WEP
        •  WPA Personal
        •  WPA Enterprise
      •  Understanding Key Refresh
      •  Understanding HTTP Redirect
      •  Understanding MAC Authentication
      •  Example: Configuring a MAC Filter List (CLI)
      •  Example: Configuring a MAC Filter List (J-Web)
      •  Example: Configuring a Virtual Access Point for No Security and HTTP Redirect (CLI)
      •  Example: Configuring a Virtual Access Point for No Security and HTTP Redirect (J-Web)
      •  Example: Configuring a Virtual Access Point for WPA Enterprise and MAC Filtering (CLI)
      •  Example: Configuring a Virtual Access Point for WPA Enterprise and MAC Filtering (J-Web)
    •   Quality of Service
      •  Understanding Quality of Service
      •  Understanding Wi-Fi Multimedia
      •   Understanding Traffic Prioritization
        •  Frames Received on Wireless Medium
        •  Frames Received on Wired Medium
        •  DiffServ Marking Effects on Frame Priority
      •  Understanding WMM Power Save
      •  Understanding No Acknowledgment
    •   Access Point Clusters
      •   Understanding Access Point Clusters
        •  Settings Shared Across a Cluster
        •  Settings That Are Not Shared Across a Cluster
        •  Channel Management in Clustered Access Points
      •  Understanding Access Point Cluster Configuration
      •  Example: Configuring an Access Point Cluster (CLI)
      •  Example: Configuring an Access Point Cluster (J-Web)
  •   Administration
    •   Access Point Operations
      •  Understanding Access Point Software Upgrades
      •  Firmware Upgrade on the AX411 Access Point (CLI Procedure)
      •  Firmware Upgrade on the AX411 Access Point (J-Web)
      •  Switching to Alternate Firmware on the AX411 Access Point (CLI Procedure)
      •  Understanding Access Point Restart
      •  Understanding Access Point Shutdown
    •   Access Point Monitoring
      •  Monitoring Access Points
  •   Index
    •  Index

Symbols

#, comments in configuration statements    1

( ), in syntax descriptions    1

802.11    

radio modes    1

wireless networking standards    1

802.11n    1

802.1x    1

CLI example    1

J-Web example    1

supplicant    1, 2

< >, in syntax descriptions    1

[ ], in configuration statements    1

{ }, in configuration statements    1

| (pipe), in syntax descriptions    1

A

access points    

configuration overview    1

default configuration    1

displaying information    1

features    1

getting started    1

licenses    1

management from SRX Series device    1

restarting    1

shutting down    1

system and network settings    1

upgrading    1

Automatic Power Save Delivery    1

B

basic rates    1

beacon intervals    1

braces, in configuration statements    1

brackets    

angle, in syntax descriptions    1

square, in configuration statements    1

broadcast rate limiting    1

C

channel assignment    1

channel bandwidth    1

channel settings    1

comments, in configuration statements    1

conventions    

text and syntax    1

country code    1

CLI example    1

J-Web example    1

curly braces, in configuration statements    1

customer support    1

contacting JTAC    1

D

default access point configuration    1

DHCP client    1, 2

displaying access point information    1

documentation    

comments on    1

DTIM period    1

dynamic WEP    1,  See IEEE 802.1x     See also IEEE 802.1x    

F

fixed multicast rate    1

fixed rate speeds    1

font conventions    1

fragmentation threshold    1

G

guard interval    1

H

HTTP redirect    1

CLI example    1

J-Web example    1

I

icons defined, notice    1

IEEE 802.11    

radio modes    1

wireless networking standards    1

IEEE 802.11n    1

IEEE 802.1x    1

CLI example    1

client    1

J-Web example    1

supplicant    1, 2

IP addresses    1

K

key refresh    1

L

Layer 2 forwarding    1

licenses    1

M

MAC address authentication    1, 2

CLI example    1, 2

J-Web example    1, 2

management VLAN    1

CLI example    1

J-Web example    1

manuals    

comments on    1

multicast rate limiting    1

N

network name    1

no acknowledgment option    1

no security    1

notice icons defined    1

NTP    1

P

parentheses, in syntax descriptions    1

power settings    1

primary channel    1

protection    1

Q

QoS    1

no acknowledgment    1

traffic prioritization    1

WMM    1

WMM power save    1

Quality of Service     See QOS    

R

radio modes    1

radios    1

beacon intervals    1

broadcast and multicast rate limiting    1

channel assignment    1

channel bandwidth    1

CLI example    1

disabling    1

DTIM period    1

fixed multicast rate    1

fixed rate speeds    1

fragmentation threshold    1

guard interval    1

IEEE 802.11n    1

J-Web example    1

maximum number of clients    1

modes    1

power and channel settings    1

primary channel    1

protection    1

radio modes    1

RTS threshold    1

transmission rates    1

transmit power allocation    1

regulatory domains    1

restarting access points    1

RTS threshold    1

S

shutting down access points    1

SRX Services Gateways    

access point management    1

SSIDs    1

static WEP    1

support, technical     See technical support    

supported rates    1

syntax conventions    1

system and network settings    1

T

technical support    

contacting JTAC    1

traffic prioritization    1

transmission rates    1

transmit power allocation    1

U

untagged VLAN    1

upgrading access point software    1

V

virtual access points    1, 2

802.1x    1

CLI example    1, 2

configuration    1

dynamic WEP    1

HTTP redirect    1

J-Web example    1, 2

key refresh    1

MAC address authentication    1

no security    1

SSID    1

static WEP    1

VLANs    1

wireless client security    1

WPA Enterprise    1

WPA Personal    1

W

Wi-Fi Protected Access Enterprise     See WPA Enterprise    

Wi-Fi Protected Access Personal     See WPA Personal    

Wired Equivalent Privacy protocol     See WEP    

wireless clients    

802.1x    1

dynamic WEP    1

maximum number    1

no security    1

requirements    1

security    1

static WEP    1

WPA Enterprise    1

WPA Personal    1

wireless security    

client    1

IEEE 802.1x    1

MAC address authentication    1

no security    1

WEP    1

WPA Enterprise    1

WPA Personal    1

WLAN overview    1

WMM    1

WMM power save    1

WPA Enterprise    1

CLI example    1

J-Web example    1

WPA Personal    1