System and Network Configuration Overview
Understanding How the Access Point Obtains an IP Address
Understanding Layer 2 Forwarding Operations
Understanding Management VLAN Support
Understanding Untagged VLAN Designation
Understanding NTP Support
Understanding 802.1x Authentication of the Access Point
Example: Configuring Management Options (CLI)
Example: Configuring Management Options (J-Web)
Example: Configuring 802.1x Authentication (CLI)
Example: Configuring 802.1x Authentication (J-Web)

Country Code and Regulatory Domain

Understanding the Country Code
Understanding Regulatory Domains and IEEE 802.11d
Example: Disabling Country Broadcast (CLI)
Example: Disabling Country Broadcast (J-Web)

Radio Settings

Radio Configuration Overview

Understanding Turning a Radio Off

Understanding Radio Modes

Understanding Power and Channel Assignment

Understanding Transmit Power Allocation

Understanding Channel Assignment

Understanding IEEE 802.11n

Radio Mode
Channel Bandwidth
Primary Channel (40-MHz Channel Bandwidth Only)
Transmission Rates
Protection
Guard Interval

Understanding Maximum Client Associations

Understanding Beacon Intervals

Understanding DTIM Period

Understanding Fragmentation Threshold

Understanding RTS Threshold

Understanding Fixed Multicast Rate

Understanding Broadcast and Multicast Rate Limiting

Understanding Fixed Rate Speeds

Supported Rates
Basic Rates

Example: Configuring Radio Settings (CLI)

Example: Configuring Radio Settings (J-Web)

Virtual Access Points

Understanding Virtual Access Points

Virtual Access Point Configuration Overview

Understanding SSIDs

Understanding Virtual Access Points and VLANs

Understanding Client Security

No Security
Static WEP
Dynamic WEP
WPA Personal
WPA Enterprise

Understanding Key Refresh

Understanding HTTP Redirect

Understanding MAC Authentication

Example: Configuring a MAC Filter List (CLI)

Example: Configuring a MAC Filter List (J-Web)

Example: Configuring a Virtual Access Point for No Security and HTTP Redirect (CLI)

Example: Configuring a Virtual Access Point for No Security and HTTP Redirect (J-Web)

Example: Configuring a Virtual Access Point for WPA Enterprise and MAC Filtering (CLI)

Example: Configuring a Virtual Access Point for WPA Enterprise and MAC Filtering (J-Web)

Quality of Service

Understanding Quality of Service

Understanding Wi-Fi Multimedia

Understanding Traffic Prioritization

Frames Received on Wireless Medium
Frames Received on Wired Medium
DiffServ Marking Effects on Frame Priority

Understanding WMM Power Save

Understanding No Acknowledgment

Access Point Clusters

Understanding Access Point Clusters

Settings Shared Across a Cluster
Settings That Are Not Shared Across a Cluster
Channel Management in Clustered Access Points

Understanding Access Point Cluster Configuration

Example: Configuring an Access Point Cluster (CLI)

Example: Configuring an Access Point Cluster (J-Web)

Administration

Access Point Operations

Understanding Access Point Software Upgrades
Firmware Upgrade on the AX411 Access Point (CLI Procedure)
Firmware Upgrade on the AX411 Access Point (J-Web)
Switching to Alternate Firmware on the AX411 Access Point (CLI Procedure)
Understanding Access Point Restart
Understanding Access Point Shutdown

Access Point Monitoring

Monitoring Access Points

Index

Index

Table of Contents