Configuring a Routing Policy for MPLS Layer 3 VPNs (CLI Procedure)

To configure a Layer 3 VPN routing policy on a CE router:

1. Configure the routing policy for the loopback interface.

   [edit]user@host# edit policy-options policy-statement policy-name

2. Define the term for accepting packets.

   [edit policy-options policy-statement policy-name]user@host# set term term-name-accept from protocol direct route-filter local-loopback-address/netmask exactuser@host# set termterm-name-accept then accept

3. Define the term for rejecting packets.

   [edit policy-options policy-statement policy-name]user@host# set termterm-name-reject then reject

4. Commit the configuration if you are finished configuring the device.

   [edit]user@host# commit

Related Topics

• Junos OS Feature Support Reference for SRX Series and J Series Devices
• MPLS Layer 3 VPN Configuration Overview