Table of Contents

About This Guide

J Series and SRX Series Documentation and Release Notes
Objectives
Audience
Supported Routing Platforms
Document Conventions
Documentation Feedback
Requesting Technical Support

MPLS Overview

Label Switching

Label-Switched Paths

Label-Switching Routers

Label Operations

Penultimate Hop Popping

LSP Establishment

Static LSPs
Dynamic LSPs

MPLS Configuration Overview

Example: Deleting Security Services

Example: Enabling MPLS

Traffic Engineering

MPLS Traffic Engineering and Signaling Protocols Overview

LDP Signaling Protocol

Understanding the LDP Signaling Protocol
Example: Configuring LDP-Signaled LSPs

RSVP Signaling Protocol

Understanding the RSVP Signaling Protocol

RSVP Fundamentals
Bandwidth Reservation Requirement
Explicit Route Objects
Constrained Shortest Path First
Link Coloring

Example: Configuring RSVP-Signaled LSPs

Point-to-Multipoint LSPs

Understanding Point-to-Multipoint LSPs
Point-to-Multipoint LSP Configuration Overview

MPLS VPN Overview

MPLS VPN Topology
MPLS VPN Routing
VRF Instances
Route Distinguishers

MPLS Layer 2 VPNs

Understanding MPLS Layer 2 VPNs
MPLS Layer 2 VPN Configuration Overview
Configuring Interfaces for MPLS VPNs (CLI Procedure)
Configuring MPLS for VPNs (CLI Procedure)
Configuring a BGP Session for MPLS VPNs (CLI Procedure)
Configuring an IGP and the LDP Signaling Protocol (CLI Procedure)
Configuring an IGP and the RSVP Signaling Protocol (CLI Procedure)
Configuring Routing Options for MPLS VPNs (CLI Procedure)
Configuring a Routing Instance for MPLS VPNs (CLI Procedure)
Configuring a Routing Policy for MPLS Layer 2 VPNs (CLI Procedure)
Verifying an MPLS Layer 2 VPN Configuration

MPLS Layer 3 VPNs

Understanding MPLS Layer 3 VPNs
MPLS Layer 3 VPN Configuration Overview
Configuring a Routing Policy for MPLS Layer 3 VPNs (CLI Procedure)
Verifying an MPLS Layer 3 VPN Configuration

MPLS Layer 2 Circuits

Understanding MPLS Layer 2 Circuits
MPLS Layer 2 Circuit Configuration Overview
Configuring an MPLS Layer 2 Circuit (CLI Procedure)
Verifying an MPLS Layer 2 Circuit Configuration

CLNS Overview

CLNS Configuration Overview

Example: Configuring a VPN Routing Instance for CLNS

ES-IS for CLNS

Understanding ES-IS for CLNS
Example: Configuring ES-IS for CLNS

IS-IS for CLNS

Understanding IS-IS for CLNS
Example: Configuring IS-IS for CLNS

Static Routes for CLNS

Understanding Static Routes for CLNS
Example: Configuring Static Routes for CLNS

BGP for CLNS VPNs

Understanding BGP for CLNS VPNs
Example: Configuring BGP for CLNS VPNs

Verifying a CLNS VPN Configuration

VPLS Overview

Sample VPLS Topology
VPLS on PE Routers
Using an Ethernet Switch as the VPLS CE Device
VPLS Exceptions on J Series and SRX Series Devices

VPLS Configuration Overview

VPLS Interfaces

Understanding VPLS Interfaces

Interface Name
Encapsulation Type
Flexible VLAN Tagging
VLAN Rewrite

Example: Configuring Routing Interfaces on the VPLS PE Router

Example: Configuring the Interface to the VPLS PE Device

VPLS Routing Instances

Understanding VPLS Routing Instances

BGP Signaling
VPLS Routing Table
Trace Options

Example: Configuring the VPLS Routing Instance

Example: Configuring OSPF on the VPLS PE Router

Example: Configuring RSVP on the VPLS PE Router

Example: Configuring MPLS on the VPLS PE Router

Example: Configuring LDP on the VPLS PE Router

Example: Configuring Routing Options on the VPLS PE Router

Example: Configuring BGP on the VPLS PE Router

VPLS VLAN Encapsulation

Understanding VPLS VLAN Encapsulation
Example: Configuring VPLS VLAN Encapsulation on Gigabit Ethernet Interfaces
Understanding VPLS VLAN Encapsulation on a Logical Interface
Example: Configuring VPLS VLAN Encapsulation
Example: Configuring Extended VLAN VPLS Encapsulation

Index