Index
Symbols
- #, comments in configuration statements 1
- ( ), in syntax descriptions 1
- < >, in syntax descriptions 1
- [ ], in configuration statements 1
- { }, in configuration statements 1
- | (pipe), in syntax descriptions 1
A
- ASs (autonomous systems)
- AS number, in VPNs 1
- LSPs through 1
B
- BGP (Border Gateway Protocol)
- export policy for CLNS 1
- for CLNS VPN NLRI 1
- VPLS 1, 2
- VPNs 1
- braces, in configuration statements 1
- brackets
- angle, in syntax descriptions 1
- square, in configuration statements 1
C
- CE (customer edge) routers 1, See also VPLS
- description 1
- circuit See Layer 2 circuits
- CLNS (Connectionless Network Service) VPNs
- BGP export policy 1
- BGP, to carry CLNS VPN NLRI 1
- displaying configurations 1
- ES-IS 1
- IS-IS 1
- linking hosts 1
- overview 1
- requirements 1
- static routes (without IS-IS) 1
- verifying configuration 1
- VPN routing instance 1
- comments, in configuration statements 1
- Connectionless Network Service See CLNS
- conventions
- notice icons 1
- text and syntax 1
- CSPF algorithm See CSPF
- curly braces, in configuration statements 1
- customer edge routers See CE routers
- customer support 1
- contacting JTAC 1
D
- diagnosis
- displaying CLNS VPN configurations 1
- RSVP neighbors 1
- RSVP sessions 1
- RSVP-signaled LSP 1
- documentation
- comments on 1
- dynamic LSPs 1
E
- egress router See LSPs; outbound router
- Enabling MPLS 1
- End System-to-Intermediate System See ES-IS
- ES-IS (End System-to-Intermediate System) 1
- for a PE router in a CLNS island 1
- overview 1
- export routing policy, for Layer 2 VPNs 1
F
- font conventions 1
H
- hardware
- supported platforms 1
I
- IGPs (interior gateway protocols) 1, See also OSPF
- VPNs 1
- import routing policy, for Layer 2 VPNs 1
- inbound router, in an LSP 1
- ingress router See inbound router; LSPs
- interfaces
- VPLS 1, 2
- VPLS encapsulation types 1
- Intermediate System-to-Intermediate System See IS-IS
- IS-IS (Intermediate System-to-Intermediate System)
- for CLNS route exchange 1
- with CLNS 1
L
- Label Distribution Protocol See LDP
- label switching 1
- label-switched paths See LSPs
- label-switching routers (LSRs) 1
- labels, MPLS 1
- label operations 1
- PHP 1
- Layer 2 circuits
- AS number 1
- basic, description 1
- encapsulation 1
- IGPs 1
- MPLS 1
- neighbor address 1
- participating interfaces 1
- signaling protocols 1
- verifying PE router connections 1
- verifying PE router interfaces 1
- virtual circuit ID 1
- Layer 2 VPNs
- AS number 1
- basic, description 1
- BGP 1
- encapsulation 1
- export routing policies 1
- IGPs 1
- import routing policies 1
- MPLS 1
- participating interfaces 1
- routing instance 1
- signaling protocols 1
- verifying PE router connections 1
- verifying PE router interfaces 1
- Layer 3 VPNs
- AS number 1
- basic, description 1
- BGP 1
- IGPs 1
- participating interfaces 1
- route target 1
- routing instance 1
- routing policies 1
- signaling protocols 1
- verifying PE router connections 1
- LDP (Label Distribution Protocol)
- and OSPF for VPNs 1
- overview 1
- requirements 1
- VPLS 1
- LSPs (label-switched paths)
- description 1
- dynamic LSPs 1
- for RSVP in a VPN 1
- label operations 1
- label switching 1
- labels 1
- LSR types 1
- PHP 1
- static LSPs 1
- LSRs (label-switching routers) 1
M
- manuals
- comments on 1
- MPLS (Multiprotocol Label Switching) 1, See also VPNs
- dynamic LSPs 1
- enabling and disabling 1
- label operations 1
- label switching 1
- labels 1
- Layer 2 VPNs and Layer 2 circuits 1
- LSP for RSVP in a VPN 1
- LSPs 1
- LSR types 1
- PHP 1
- static LSPs 1
- traffic engineering See MPLS traffic engineering
- VPLS 1
- MPLS traffic engineering
- LDP signaling 1
- overview 1
- requirements 1
- RSVP signaling 1
- verifying RSVP neighbors 1
- verifying RSVP sessions 1
- verifying RSVP-signaled LSPs 1
- multiple push label operation 1
N
- network interfaces
- VPN configuration 1
- network layer reachability information See NLRI
- network service access points See NSAPs
- networks
- sample LSP topology 1
- sample RSVP topology 1
- NLRI (network layer reachability information), BGP
- for CLNS 1
- for VPNs 1
- notice icons 1
- NSAPs (network service access points)
- overview 1
- sample configurations 1
O
- Open Systems Interconnection (OSI) networks, CLNS VPNs 1
- OSI (Open Systems Interconnection) networks, CLNS VPNs 1
- OSPF (Open Shortest Path First)
- and LDP for VPNs 1
- and RSVP for VPNs 1
- VPLS 1
- outbound router, in an LSP 1
P
- packet encapsulation
- Layer 2 circuits 1
- Layer 2 VPNs 1
- parentheses, in syntax descriptions 1
- PE (provider edge) routers 1, See also VPLS
- description 1
- ES-IS for a CLNS island 1
- route distinguishers 1
- verifying Layer 2 circuit connections 1
- verifying Layer 2 circuit interfaces 1
- verifying Layer 2 VPN connections 1
- verifying Layer 2 VPN interfaces 1
- verifying Layer 3 VPN connections 1
- penultimate hop popping (PHP) 1
- penultimate router, in an LSP 1
- PHP (penultimate hop popping) 1
- ping mpls l2circuit interface command 1
- ping mpls l2circuit virtual-circuit command 1
- ping mpls l2vpn instance 1
- ping mpls l3vpn command 1
- pop label operation 1
- protocols
- LDP See LDP
- RSVP See RSVP
- provider edge routers See PE routers
- provider routers
- description 1
- push label operation 1
R
- reachability 1, See also NLRI
- Resource Reservation Protocol See RSVP
- route distinguishers
- description 1
- formats for 1
- route targets, VPN
- in a routing instance 1
- routing
- configuring VPNs 1
- MPLS traffic engineering 1
- VPNs 1
- routing instance
- for CLNS static routes (with IS-IS) 1
- for CLNS static routes (without IS-IS) 1
- VPLS 1, 2, 3
- VPN configuration 1
- VPN route target 1
- VRF instances 1
- VRF table 1
- routing policies
- BGP export, for CLNS 1
- Layer 2 VPN export policy 1
- Layer 2 VPN import policy 1
- Layer 3 VPNs 1
- routing solutions
- MPLS traffic engineering 1
- VPNs 1
- routing table
- verifying RSVP-signaled LSPs 1
- VPLS 1
- RSVP (Resource Reservation Protocol)
- and OSPF for VPNs 1
- overview 1
- requirements 1
- verifying LSPs 1
- verifying neighbors 1
- verifying sessions 1
- verifying the routing table on the entry router 1
- VPLS 1
- RSVP neighbors, verifying 1
S
- sample configurations
- CLNS VPN configuration 1
- sessions
- RSVP, verifying 1
- show ldp neighbor command 1
- show ldp session detail command 1
- show route table inet.3 command 1, 2
- show rsvp neighbor command 1
- show rsvp session detail command 1
- signaling protocols
- VPNs 1
- site identifier, VPLS 1
- site name, VPLS 1
- site preference, VPLS 1
- site range, VPLS 1
- static LSPs 1
- static routes
- CLNS VPNs (with IS-IS) 1
- CLNS VPNs (without IS-IS) 1
- support, technical See technical support
- swap and push label operation 1
- swap label operation 1
- syntax conventions 1
T
- technical support
- contacting JTAC 1
- topology
- point-to-multipoint LSPs 1
- sample LSP network 1
- sample RSVP-signaled LSP 1
- trace options
- VPLS 1
- traceroute source bypass-routing gateway command 1
- traffic engineering See MPLS traffic engineering; traffic engineering database
- transit routers, in an LSP 1
V
- verification
- CLNS VPNs 1
- RSVP neighbors 1
- RSVP sessions 1
- RSVP-signaled LSP 1
- virtual circuit ID, for Layer 2 circuits 1
- virtual private LAN service See VPLS
- virtual private networks See VPNs
- VLAN CCC
- example configuration 1
- VLAN encapsulation
- configuring 1
- VLAN VPLS
- example configuration 1, 2, 3
- VLANs (virtual LANs)
- rewrite 1
- tagging 1
- VPLS (virtual private LAN service) 1
- BGP 1, 2
- CE device 1
- configuration overview 1
- exceptions on J Series Services Routers 1
- functions 1
- interface encapsulation 1
- interfaces 1, 2
- LDP 1
- MPLS 1
- OSPF 1
- overview 1
- routing instance 1, 2, 3
- routing interfaces 1
- routing options 1
- routing table 1
- RSVP 1
- sample topology 1
- site identifier 1
- site name 1
- site preference 1
- site range 1
- supported devices and interfaces 1
- trace options 1
- VLAN rewrite on interfaces 1
- VLAN tagging 1
- VPN routing and forwarding (VRF) instances 1
- VPN routing and forwarding table See VRF table
- VPNs (virtual private networks) 1, See also Layer 2 circuits; Layer 2 VPNs: Layer 3 VPNs; MPLS
- AS number 1
- basic Layer 2 circuit description 1
- basic Layer 2 VPN description 1
- basic Layer 3 VPN description 1
- BGP 1
- CLNS See CLNS
- components 1
- IGPs 1
- Layer 2 circuit configuration 1
- LSP for RSVP 1
- MPLS 1
- overview 1
- participating interfaces 1
- route distinguishers 1, 2
- route target 1
- routing information 1
- routing instance See routing instance
- routing requirements 1
- signaling protocols 1
- tunneling process 1
- VRF instances 1
- VRF table See VRF table
- VRF (VPN routing and forwarding) table 1
- VRF instances 1
- VRF instances
- overview 1