Activating the CDMA EV-DO Modem Card with IOTA Provisioning

Manual activation stores the supplied values in the 3G wireless modem card's nonvolatile memory. If the modem card is reset or you need to update Mobile IP (MIP) parameters, use the CLI operational mode command to activate the modem card with IOTA.

Before You Begin
Activate the CDMA EV-DO 3G wireless modem card. For information, see Activating the CDMA EV-DO Modem Card Manually.

CLI Operational Mode Command

To activate the CDMA EV-DO 3G wireless modem card with IOTA:

user@host> request modem wireless interface
cl-0/0/8 activate iota

Beginning IOTA Activation. It can take up to 5 minutes

Please check the trace logs for details.

To check the trace log for account activation details:

user@host> tail -f /var/log/wwand.log

Jun 25 04:42:55: IOTA cl-0/0/8 Event: IOTA Start... Success

Jun 25 04:43:45: IOTA cl-0/0/8 OTA SPL unlock...  Success

Jun 25 04:43:56: IOTA cl-0/0/8 Committing OTA Parameters to NVRAM... Success

Jun 25 04:44:02: IOTA cl-0/0/8 Over the air provisioning... Complete

Jun 25 04:44:04: IOTA cl-0/0/8 IOTA Event: IOTA End... Success