show security flow session destination-port

Syntax

show security flow session destination-port destination-port-number [brief | extensive | summary]

Release Information

Command introduced in Release 8.5 of Junos OS; Filter and view options added in Release 10.2 of Junos OS.

Description

Display information about each session that uses the specified destination port.

Options

destination-port-number —Number of the destination port for which to display sessions information.

Range: 1 through 65,535

brief | extensive | summary: Display the specified level of output.

Required Privilege Level

view

List of Sample Output

show security flow session destination-port 23
show security flow session destination-port 23 brief
show security flow session destination-port 23 extensive
show security flow session destination-port 23 summary

Output Fields

Table 78 lists the output fields for the show security flow session destination-port command. Output fields are listed in the approximate order in which they appear.

Table 78: show security flow session destination-port Output Fields

Field Name	Field Description
Session ID	Number that identifies the session. You can use this ID to get additional information about the session.
Policy name	Policy that permitted the traffic.
Timeout	Idle timeout after which the session expires.
In	Incoming flow (source and destination IP addresses, application protocol, interface, session token, route, gateway, tunnel, port sequence, FIN sequence, FIN state, packets and bytes).
Out	Reverse flow (source and destination IP addresses, application protocol, interface, session token, route, gateway, tunnel, port sequence, FIN sequence, FIN state, packets and bytes).
Total sessions	Total number of sessions.
Status	Session status.
Flag	Internal flag depicting the state of the session, used for debugging purposes.
Policy name	Name and ID of the policy that the first packet of the session matched.
Source NAT pool	The name of the source pool where NAT is used.
Application	Name of the application.
Maximum timeout	Maximum session timeout.
Current timeout	Remaining time for the session unless traffic exists in the session.
Session State	Session state.
Start time	Time when the session was created, offset from the system start time.
Unicast-sessions	Number of unicast sessions.
Multicast-sessions	Number of multicast sessions.
Failed-sessions	Number of failed sessions.
Sessions-in-use	Number of sessions in use. Valid sessions Pending sessions Invalidated sessions Sessions in other states
Maximum-sessions	Number of maximum sessions.

Sample Output

show security flow session destination-port 23

root> show security flow session destination-port
23

Flow Sessions on FPC4 PIC1:
Total sessions: 0

Flow Sessions on FPC5 PIC0:

Session ID: 200067563, Policy name: default-policy/2, Timeout: 1798, Valid
  In: 40.0.0.100/32783 --> 30.0.0.100/23;tcp, If: ge-0/0/2.0, Pkts: 10, Bytes: 610
  Out: 30.0.0.100/23 --> 40.0.0.100/32783;tcp, If: ge-0/0/1.0, Pkts: 9, Bytes: 602
Total sessions: 1

Flow Sessions on FPC5 PIC1:
Total sessions: 0

show security flow session destination-port 23 brief

root> show security flow session destination-port
23 brief

Flow Sessions on FPC4 PIC1:
Total sessions: 0

Flow Sessions on FPC5 PIC0:

Session ID: 200067563, Policy name: default-policy/2, Timeout: 1798, Valid
  In: 40.0.0.100/32783 --> 30.0.0.100/23;tcp, If: ge-0/0/2.0, Pkts: 10, Bytes: 610
  Out: 30.0.0.100/23 --> 40.0.0.100/32783;tcp, If: ge-0/0/1.0, Pkts: 9, Bytes: 602
Total sessions: 1

Flow Sessions on FPC5 PIC1:
Total sessions: 0

show security flow session destination-port 23 extensive

root> show security flow session destination-port
23 extensive

Flow Sessions on FPC4 PIC1:
Total sessions: 0

Flow Sessions on FPC5 PIC0:

Session ID: 200067563, Status: Normal
Flag: 0x40
Policy name: default-policy/2
Source NAT pool: Null, Application: junos-telnet/10
Maximum timeout: 1800, Current timeout: 1794
Session State: Valid
Start time: 670359, Duration: 26
   In: 40.0.0.100/32783 --> 30.0.0.100/23;tcp, 
    Interface: ge-0/0/2.0, 
    Session token: 0x180, Flag: 0x0x21
    Route: 0x60010, Gateway: 40.0.0.100, Tunnel: 0
    Port sequence: 0, FIN sequence: 0, 
    FIN state: 0, 
    Pkts: 10, Bytes: 610
   Out: 30.0.0.100/23 --> 40.0.0.100/32783;tcp, 
    Interface: ge-0/0/1.0, 
    Session token: 0x1c0, Flag: 0x0x20
    Route: 0x70010, Gateway: 30.0.0.100, Tunnel: 0
    Port sequence: 0, FIN sequence: 0,  
    FIN state: 0, 
    Pkts: 9, Bytes: 602
Total sessions: 1

Flow Sessions on FPC5 PIC1:
Total sessions: 0

show security flow session destination-port 23 summary

root> show security flow session destination-port
23 summary

Flow Sessions on FPC4 PIC1:

Valid sessions: 0
Pending sessions: 0
Invalidated sessions: 0
Sessions in other states: 0
Total sessions: 0

Flow Sessions on FPC5 PIC0:

Valid sessions: 1
Pending sessions: 0
Invalidated sessions: 0
Sessions in other states: 0
Total sessions: 1

Flow Sessions on FPC5 PIC1:

Valid sessions: 0
Pending sessions: 0
Invalidated sessions: 0
Sessions in other states: 0
Total sessions: 0