show poe interface

Syntax

show poe interface <ge-fpc/pic/port>

Release Information

Command introduced in Release 9.5 of Junos OS.

Description

Display the status of Power over Ethernet (PoE) ports.

Options

none—Display the status of all PoE ports on the SRX Series device.

ge-fpc/pic/port— (Optional) Display the status of a specific PoE port on the SRX Series device.

Required Privilege Level

View

Output Fields

Table 39 lists the output fields for the show poe interface command. Output fields are listed in the approximate order in which they appear.

Table 39: show poe interface Output Fields

Field name	Field Description
PoE Interface	Specifies the interface name.
Admin Status	Specifies whether PoE capabilities are enabled or disabled.
Oper status	Specifies the operational status of the port.
Max-power	Specifies the maximum power configured on the port.
Priority	Specifies whether the port is high priority or low priority.
Power-consumption	Specifies how much power is being used by the port.
Class	Indicates the class of the powered device as defined by the IEEE 802 AF standard.

show poe interface

user@host>show poe interface

Interface Admin status Oper status Max power Priority Power consumption Class
 			ge-0/0/0 Enabled      Searching   15.4W     Low      0.0W                0
 			ge-0/0/1 Enabled      Powered-up  15.4W     High     6.6W                0
 			ge-0/0/2 Disabled     Disabled    15.4W     Low      0.0W                0
 			ge-0/0/3 Disabled     Disabled    15.4W     Low      0.0W                0

user@host>show poe interface ge-0/0/1

PoE interface status	:
PoE interface                :  ge-0/0/1
Administrative status        : Enabled
Operational status           : Powered-up
Power limit on the interface : 15.4 W
Priority                     : High
Power consumed               : 6.6 W
Class of power device        :   0