gtp

Syntax

gtp {enable;profile profile name {apn pattern-string {mcc-mnc <mcc-mnc-number> {action <drop | pass | selection <ms | net | vrf> {}}drop {aa-create-pdp {<0 | 1 | All>;}aa-delete-pdp {<0 | 1 | All>;}create pdp {<0 | 1 | All>;}data-record {<0 | 1 | All>;}delete-pdp {<0 | 1 | All>;}echo {<0 | 1 | All>;}error-indication {<0 | 1 | All>;}failure-report {<0 | 1 | All>;}fwd-relocation {<0 | 1 | All>;}fwd-srns-context {<0 | 1 | All>;}g-pdu {<0 | 1 | All>;}identification {<0 | 1 | All>;}node-alive {<0 | 1 | All>;}note-ms-present {<0 | 1 | All>;}pdu-notification {<0 | 1 | All>;}ran-info {<0 | 1 | All>;}redirection {<0 | 1 | All>;}relocation-cancel {<0 | 1 | All>;}send-route {<0 | 1 | All>;}sgsn-context {<0 | 1 | All>;}supported-extension {<0 | 1 | All>;}update-pdp {<0 | 1 | All>;}ver-not-supported {<0 | 1 | All>;}log {forwarded <basic | detail>;prohibited <basic | detail>;rate-limited <basic | detail>;frequency-number <number>;}state-invalid <basic | detail>;}max-message-length number;min-message-length number;rate-limit messages per second;remove-r6;seq-number-validated;timeout <number of hours>;}}traceoptionsfile filename {<files | match | no-world-readable | size | world-readable>;}flag {< all | chassis-cluster | configuration | flow | parser | >;}no-remote-trace;}}

Hierarchy Level

[edit security gprs]

Release Information

Statement introduced in Release 10.0 of Junos OS.

Description

Use the GTP commands to enable the GTP service, configure GTP objects, set traceoptions, remove GTP inspection-object configurations, and obtain configuration information.

A Juniper Networks security device provides firewall protection for the following types of GPRS interfaces:

Gn—The Gn interface is the connection between an SGSN and a GGSN within the same Public Land Mobile Network (PLMN).
Gp—The Gp interface is the connection between two Public Land Mobile Network PLMNs.
Gi—The Gi interface is the connection between a GGSN and the Internet or destination networks connected to a PLMN.

Options

The remaining statements are explained separately.

Usage Guidelines

For configuration instructions and examples, see the Junos OS Security Configuration Guide.

Required Privilege Level

security—To view this statement in the configuration.

security-control—To add this statement to the configuration.