Interfaces Configuration Statement Hierarchy

interfaces { interface-name {accounting-profile name ;aggregated-ether-options {lacp {(active | passive);periodic (fast | slow);}link-speed speed;minimum-links number;}atm-options {cell-bundle-size cells ;ilmi;linear-red-profiles profile-name {high-plp-max-threshold percent ;low-plp-max-threshold percent ;queue-depth cells high-plp-threshold percent low-plp-threshold percent ;}mpls {pop-all-labels {required-depth number ;}}pic-type (atm1 | atm2);plp-to-clp;promiscuous-mode {vpi vpi-identifier ;}scheduler-maps map-name {forwarding-class class-name { epd-threshold cells plp1 cells ;linear-red-profile profile-name ;priority (low | high);transmit-weight (cells number | percent number );}vc-cos-mode (alternate | strict);} vpi vpi-identifier {maximum-vcs maximum-vcs ;oam-liveness {down-count cells;up-count cells;}oam-period (disable | seconds); shaping { (cbr rate | rtvbr peak rate sustained rate burst length | vbr peak rate sustained rate burst length );queue-length number ;}}} cellular-options { roaming-mode (home only | automatic) gsm-options { select-profile profile-name; profiles { profile-name { sip-user-id simple-ip-user-id; sip-password simple-ip-password; access-point-nameapn; authentication-method (pap | chap | none) }}}} clocking (external | internal); dce;description text ;dialer-options {pool pool-identifier ;priority priority-number ;}disable; dsl-options { loopback local; operating-mode mode ; }ds0-options {bert-algorithm algorithm ;bert-error-rate rate ;bert-period seconds ;byte-encoding (nx56 | nx64);fcs (16 | 32);idle-cycle-flag (flags | ones);invert data;loopback (payload | remote);start-end-flag (shared | filler);}e1-options {bert-algorithm algorithm ;bert-error-rate rate ;bert-period seconds ;fcs (16 | 32);framing (g704 | g704-no-crc4 | unframed);idle-cycle-flag (flags | ones);invert data;loopback (local | remote);start-end-flag (shared | filler);timeslots time-slot-range;}e3-options {atm-encapsulation (direct | PLCP);bert-algorithm algorithm ;bert-error-rate rate ;bert-period seconds ;buildout feet;compatibility-mode (digital-link | kentrox | larscom) <subrate value >;fcs (16 | 32);framing (g.751 | g.832);idle-cycle-flag value ;loopback (local | remote);(payload-scrambler | no-payload-scrambler);start-end-flag value ;(unframed | no-unframed);}encapsulation type ;ether-vpls-over-atm-llc;es-options {backup-interface es- pim /0/ port ;} fabric-options { member-interfaces member-interface-name; }failure-options {[trigger-link-failure interface-name ];}fastether-options { (flow-control | no-flow-control); ingress-rate-limit rate ;(loopback | no-loopback);mpls {pop-all-labels {required-depth [ number ];}} redundant-parent interface-name; source-address-filter { mac-address ;}(source-filtering | no-source-filtering);}flexible-vlan-tagging;framing (lan-phy | sdh | sonet | wan-phy); gigether-options {802.3ad aex;(auto-negotiation <remote-fault (local-interface-online | local-interface-offline)> | no-auto-negotiation); (flow-control | no-flow-control); ignore-l3-incompletes;(loopback | no-loopback);mpls {pop-all-labels {required-depth [ number ];}} redundant-parent interface-name; source-address-filter { mac-address ;}(source-filtering | no-source-filtering);ethernet-switch-profile {ethernet-policer-profile {input-priority-map {ieee802.1p premium [ values ];}output-priority-map {classifier {premium {forward-class class-name {loss-priority (high | low);}}}}policer cos-policer-name {aggregate {bandwidth-limit bps ;burst-size-limit bytes ;}premium {bandwidth-limit bps ;burst-size-limit bytes ;}}}(mac-learn-enable | no-mac-learn-enable);tag-protocol-id [ tpids ];}}(gratuitous-arp-reply | no-gratuitous-arp-reply); hold-time up milliseconds down milliseconds ;isdn-options {bchannel-allocation (ascending | descending) ; calling-number number ; incoming-called-number number <reject>; media-type (voice | data) ; network-type (cpe | network) ; pool pool-name <priority priority> ;spid1 spid-string ;spid2 spid-string ;static-tei-val value ;switch-type (att5e | etsi | ni1 | ntdms100 | ntt); t310 seconds ;tei-option (first-call | power-up);}keepalives <down-count number > <interval seconds > <up-count number >; lmi { lmi-type (ansi | itu);n391dte number ;n392dce number ;n392dte number ;n393dce number ;n393dte number ;t391dte seconds ;t392dce seconds ;}mac mac-address ;mlfr-uni-nni-bundle-options {acknowledge-retries number ;acknowledge-timer milliseconds ;action-red-differential-delay (disable-tx | remove-link);drop-timeout milliseconds ;fragment-threshold bytes ;hello-timer milliseconds ; link-layer-overhead percent ;lmi-type (ansi | itu);minimum-links number ;mrru bytes ;n391 number ;n392 number ;n393 number ;red-differential-delay milliseconds ;t391 seconds ;t392 seconds ;yellow-differential-delay milliseconds ;} modem-options { dialin (console | routable); init-command-string initialization-command-string ; }mtu bytes ;multiservice-options { boot-command filename;(core-dump | no-core-dump);(syslog | no-syslog);}native-vlan-id vlan-id;no-gratuitous-arp-request;no-keepalives;no-partition {interface-type type ;}partition partition-number { interface-type type ; oc-slice oc-slice-range ;timeslots time-slot-range ;}passive-monitor-mode;per-unit-scheduler;ppp-options {chap {access-profile name; default-chap-secret name ; local-name name;passive;}compression {acfc;pfc;}no-termination-request;lcp-restart-timer milliseconds ;ncp-restart-timer milliseconds ;}promiscuous-mode; redundant-ether-options { (flow-control | no-flow-control); lacp {(active | passive);periodic (fast | slow);} link-speed speed; (loopback | no-loopback); minimum-links number; redundancy-group number; source-address-filter mac-address; (source-filtering | no-source-filtering); } serial-options { clock-rate rate ; clocking-mode (dce | internal | loop); control-leads { control-signal (assert | de-assert | normal); cts (ignore | normal | require); dcd (ignore | normal | require); dsr (ignore | normal | require); dtr signal-handling-option ; ignore-all; indication (ignore | normal | require); rts (assert | de-assert | normal); tm (ignore | normal | require); }control-polarity (positive | negative); cts-polarity (positive | negative); dcd-polarity (positive | negative); dsr-polarity (positive | negative); dtr-circuit (balanced | unbalanced); dtr-polarity (positive | negative); encoding (nrz | nrzi); indication-polarity (positive | negative);line-protocol protocol ; loopback mode; rts-polarity (positive | negative); tm-polarity (positive | negative); transmit-clock invert; }services-options {inactivity-timeout seconds ;open-timeout seconds ;syslog {host hostname {facility-override facility-name ;log-prefix prefix-number ;services priority-level ;}}}shdsl-options {annex (annex-a | annex-b);line-rate line-rate ;loopback (local | remote | payload);snr-margin { current margin ;snext margin ;}}t1-options {bert-algorithm algorithm ;bert-error-rate rate ;bert-period seconds ;buildout value ;byte-encoding (nx64 | nx56);fcs (16 | 32);framing (esf | sf);idle-cycle-flags (flags | ones);invert-data;line-encoding (ami | b8zs);loopback (local | payload | remote);remote-loopback-respond;start-end-flag (filler | shared);timeslots time-slot-range ;}t3-options {atm-encapsulation (direct | PLCP);bert-algorithm algorithm ;bert-error-rate rate ;bert-period seconds ;buildout feet;(cbit-parity | no-cbit-parity);compatibility-mode (adtran | digital-link | kentrox | larscom | verilink)<subrate value >;fcs (16 | 32);(feac-loop-respond | no-feac-loop-respond);idle-cycle-flag value ;(long-buildout | no-long-buildout);(loop-timing | no-loop-timing);loopback (local | payload | remote);(payload-scrambler | no-payload-scrambler);start-end-flag value ;}threshold bytes ;traceoptions {flag flag < flag-modifier > <disable>;}(traps | no-traps);vdsl-options {vdsl-profile 17a;}unit logical-unit-number {accept-source-mac {mac-address mac-address ;policer {input policer-name ;output policer-name ;}}accounting-profile name ; allow-any-vci;atm-scheduler-map (default | map-name );backup-options {interface interface-name ;}bandwidth rate ;cell-bundle-size cells ;clear-dont-fragment-bit;compression {rtp {f-max-period number ;maximum-contexts number ;port {maximum port-number ;minimum port-number ;}queues [ queue-numbers ];}}compression-device interface-name;copy-tos-to-outer-ip-header;description text ;dialer-options { activation-delay seconds ; callback;callback-wait-period seconds ;deactivation-delay seconds ;dial-string [ dial-string-numbers ];idle-timeout seconds ;incoming-map (accept-all | caller caller-number );initial-route-check seconds ;load-interval seconds ;load-threshold percent ;pool pool-name ; redial-delay time ;watch-list {[ routes ];}}disable; disable-mlppp-inner-ppp-pfc;dlci dlci-identifier ;drop-timeout milliseconds ;dynamic-call-admission-control {activation-priority number ;bearer-bandwidth-limit threshold ;}encapsulation;(cisco-hdlc | frame-relay | multilink-frame-relay-uni-nni | ppp)epd-threshold cells plp1 cells ; f-max-period number ; family {bridge {interface-mode {access vlan-id vlan-id |trunk {vlan-id-list vlan-list |vlan-rewrite translate from-vlan-id internal-vlan-id}}inet {address IP–address ;}}inet6 {address IP–address ;}}}fragment-threshold bytes ;input-vlan-map {(pop | pop-pop | pop-swap | push | push-push | swap |swap-push | swap-swap);inner-tag-protocol-id tpid;inner-vlan-id number ;tag-protocol-id tpid;vlan-id number ;}interleave-fragments;inverse-arp;(keepalives | no-keepalives);link-layer-overhead percent ;minimum-links number ;mrru bytes ;multicast-dlci dlci-identifier ;multicast-vci vpi-identifier.vci-identifier ; multilink-max-classes number ; multipoint number ; multipoint;oam-liveness {up-count cells ;down-count cells ;}oam-period (disable | seconds );output-vlan-map {(pop | pop-pop | pop-swap | push | push-push | swap |swap-push | swap-swap);inner-tag-protocol-id tpid;inner-vlan-id number ;tag-protocol-id tpid;vlan-id number ;}passive-monitor-mode;peer-unit unit-number ;plp-to-clp;point-to-point;ppp-options {chap {access-profile name ; default-chap-secret name ; local-name name ;passive;}compression {acfc;pfc;}lcp-restart-timer milliseconds ;loopback-clear-timer seconds ;ncp-restart-timer milliseconds ;no-termination-request;pap;access-profile name ;default-password password ; local-name name ; local-password password ; passive; }} pppoe-options { access-concentrator name ; auto-reconnect seconds ; service-name name ; underlying-interface interface-name ; }proxy-arp;service-domain (inside | outside); shaping{(cbr rate | rtvbr peak rate sustained rate burst length |vbr peak rate sustained rate burst length );queue-length number ;}short-sequence;three-color-policer {input policer-name ;output policer-name ;}transmit-weight number ;(traps | no-traps);trunk-bandwidth rate ;trunk-id number ;tunnel {backup-destination address ; destination address ;key number ;routing-instance {destination routing-instance-name; }source source-address ;ttl number ;}vci vpi-identifier.vci-identifier ;vpi vpi-identifier ;vlan-id number ;vlan-tagging native-vlan-id vlan-id;vlan-tags inner tpid.vlan-id outer tpid.vlan-id ;family family {accounting {destination-class-usage;source-class-usage { direction ;}}address address {arp ip-address (mac | multicast-mac) mac-address <publish>;broadcast address ;destination address ;destination-profile name ;eui-64;multipoint-destination address dlci dlci-identifier ;multipoint-destination address {epd-threshold cells ;inverse-arp;oam-liveness {up-count cells ;down-count cells ;}oam-period ( disable | seconds ); shaping{(cbr rate | rtvbr peak rate sustained rate burst length |vbr peak rate sustained rate burst length );queue-length number ;}vci vpi-identifier.vci-identifier ;}preferred;primary;vrrp-group group-number {(accept-data | no-accept-data):advertise-interval seconds ;authentication-type authentication ;authentication-key key ;fast-interval milliseconds;(preempt | no-preempt) {hold-time seconds ;}priority number ;track {interface interface-name {priority-cost priority ;bandwidth-threshold bits-per-second {priority-cost priority ;}}priority-hold-time seconds ;}virtual-address [ addresses ];} web-authentication { http; }}bundle interface-name ; dhcp { client-identifier (ascii ascii | hexadecimal hexadecimal); lease-time seconds; retransmission-attempt number; retransmission-interval seconds; server-address ip-address; update-server; vendor-id vendor-id; }dialer filter-name;filter {group filter-group-number;input filter-name;input-list {[filter-names];}output filter-name ;output-list {[filter-names];}}keep-address-and-control;mtu bytes ;multicast-only; next-hop-tunnel gateway-address ipsec-vpn vpn-name; no-redirects;policer {arp policer-template-name; input policer-template-name;output policer-template-name;}primary;proxy inet-address address ;receive-options-packets;receive-ttl-exceeded;remote (inet-address address | mac-address address);rpf-check <fail-filter filter-name> { <mode loose>;}sampling { direction ;}service {input {service-set service-set-name <service-filter filter-name >;post-service-filter filter-name ;}output {service-set service-set-name <service-filter filter-name >;}}simple-filter{input filter-name;}(translate-discard-eligible | no-translate-discard-eligible);(translate-fecn-and-becn | no-translate-fecn-and-becn);unnumbered-address { interface-name ;destination destination-address ;destination-profile profile-name ;preferred-source-address interface-name ;}}}traceoptions {flag flag <disable>;}}traceoptions { file filename <files number > <match regular-expression > <size maximum-file-size > <world-readable | no-world-readable>;flag flag <disable>; }