Clear Commands

Use the clear configuration commands to clear information about the following features and protocols: Address Resolution Protocol(ARP), auto-configuration, Bidirectional Forwarding Detection (BFD), Border Gateway Protocol (BGP), chassis, 802.1X, End System-to-Intermediate System (ES-IS), Ethernet switching, firewall counters, Generic VLAN Registration Protocol (gvrp), port-forwarding helper, Internet Group Management Protocol (IGMP), IGMP snooping, interfaces, IP version 6 (IPv6), Integrated Services Digital Network (ISDN), Intermediate System-to-Intermediate System (IS-IS), Link Aggregation Control Protocol (LACP), Label Distribution Protocol (LDP), Link Layer Discovery Protocol (LLDP), log file contents, Multicast Listener Discovery, mobile IP, Multiprotocol Label Switching (MPLS), Multicast Source Discovery Protocol (MSDP), multicast, network access.

Use the clear configuration commands to clear information about the following features and protocols also: Open Shortest Path First (OSPF), Open Shortest Path First version 3 (OSPFv3), passive monitoring statistics, Packet Forwarding Engine (PFE), Pragmatic Generalized Multicast (PGM), Protocol Independent Multicast (PIM), Point-to-Point Protocol (PPP), Point-to-Point Protocol over Ethernet (PPPoE), Routing Information Protocol (RIP), Routing Information Protocol for IPv6 (RIPng), Resource Reservation Protocol (rsvp), security, services, Simple Network Management Protocol (SNMP), Spanning Tree Protocol, system, Virtual Private Lan Service (VPLS), and Virtual Router Redundancy Protocol.

• For information about features supported on different SRX Series and J Series devices, see the Junos OS Feature Support Reference for SRX Series and J Series Devices.
• For information about clear commands that are shared across Juniper Networks devices, see theJunos System Basics and Services Command Reference.