Verifying Autoinstallation

To verify that a device is configured for autoinstallation, perform the following task.

Verifying Autoinstallation Status

Purpose

Display the status of the autoinstallation feature on a device.

Action

From the CLI, enter the show system autoinstallation status command.

Sample Output

user@host> show system autoinstallation
status

Autoinstallation status:
Master state: Active
Last committed file: None
Configuration server of last committed file: 10.25.100.1
Interface:
  Name: ge-0/0/0
  State: Configuration Acquisition
  Acquired:
    Address: 192.168.124.75
    Hostname: host-ge-000
    Hostname source: DNS
    Configuration filename: router-ge-000.conf
    Configuration filename server: 10.25.100.3
  Address acquisition:
    Protocol: DHCP Client
    Acquired address: None
    Protocol: RARP Client
    Acquired address: None
Interface:
  Name: ge-0/0/1
  State: None
  Address acquisition:
    Protocol: DHCP Client
    Acquired address: None
    Protocol: RARP Client
    Acquired address: None

Meaning

The output shows the settings configured for autoinstallation. Verify that the values displayed are correct for the device when it is deployed on the network.