Figure 1 shows the WXC ISM 200.
Figure 1: WXC Integrated Services Module (WXC ISM 200)
An ONLINE LED is located on the left side of the WXC ISM 200. Table 5 describes the LED states.
Table 5: WXC Integrated Services Module ONLINE LED
The WXC ISM 200 occupies two slots in the J Series chassis. You can install only one WXC ISM 200 in a J Series Services Router chassis.
You can install Physical Interface Modules (PIMs) in the remaining slots to provide physical connections to a LAN or a WAN. PIMs receive incoming packets from the network and transmit outgoing packets to the network. Each PIM is equipped with a dedicated network processor that forwards incoming data packets to the Routing Engine, and receives outgoing data packets from the Routing Engine.
 |
Note: The exact combination of PIMs that you can install in a J Series Services Router is affected by power and thermal constraints. For more information, see the J Series Services Routers Hardware Guide. |
For information about network interfaces, and for instructions on configuring network interfaces, see the JUNOS Software Interfaces and Routing Configuration Guide.
