Hide Navigation Pane
Show Navigation Pane
Feedback
Download
SHA1
Example: Configuring Integrated Convergence Services Call Parking
This example shows how to configure Integrated Convergence Services call parking to allow users to place an active call on hold. Later, the original user can pick up the call or another user can pick it up.
Requirements
Before you begin, read Understanding Integrated Convergence Services Call Parking.
Overview
This example configures call parking with a parking lot that includes 6 parking slots where calls that are placed on hold are parked. The example specifies the logical extension 700 for the parking lot and associates the 6 slots with it.
Implicitly, the configuration specifies the extension numbers 701, 702, 703, 704, 705, and 706 for the parking slots. Slot extension numbers are increments of the logical extension number.
Configuration
Step-by-Step Procedure
To configure call parking:
- Configure call parking to include six parking
slot extensions.[edit services convergence-services] user@host# set features call-park extension 700 number-of-slots 6
- If you are done configuring the device,
commit the configuration.[edit]user@host# commit
Verification
Verify that the SRX Series media gateway (SRX Series MGW) is active.
Verifying that the SRX Series MGW is Active
Purpose
Verify that the SRX Series MGW is active. Display the length of time that the Integrated Convergence Services media gateway call routing engine has been executing.
Action
From operational mode, enter the show services convergence-services media-gateway uptime command.
