Software release
- JUNOS 5.6 and later
Description
- Active and passive traffic monitoring
- Power requirement: 0.19 A/48 V @ 9 W
- Monitors IPv4 packets
- Support for collecting and exporting cflowd records
Note: On the M5, M10, M20, M40, and M160 routers, this PIC requires an enhanced FPC. See the hardware guide for your router for more information.
Hardware features
- Monitors up to 100,000 packets per second
- Support for MTUs up to 4474 bytes for SONET interfaces
Software features
- Load distribution across multiple PICs
- cflowd version 5 support
- Provides start and end times of each export
- Supports firewall filtering and filter-based forwarding (FBF)
- Encapsulations:
- High-level Data Link Control (HDLC)
- Point-to-Point Protocol (PPP)
Note: Extended support for graceful Routing Engine switchover has been added for this PIC. To configure graceful Routing Engine switchover, you must be running JUNOS release 7.0 or later.
Cables and connectors
- DB-9 diagnostic serial console port
LEDs Status LED, one tricolor:
- Off—PIC is offline and it is safe to remove it from the chassis
- Green—PIC is operating normally
- Amber—PIC is initializing
- Red—PIC has an error or failure and no further harm can be done by removing it from the chassis
Application LED, one tricolor:
- Off—Flow collector is not running
- Green—Flow collector is running under acceptable load
- Amber—Flow collector is overloaded
