[Contents]
[Prev]
[Next]
[Report an Error]
Install the Fan Tray
To install the fan tray, follow this procedure (see Figure 27):
-
Attach an electrostatic discharge (ESD) grounding strap to your bare
wrist and connect the strap to one of the ESD points on the chassis. For more information about ESD, see Prevent Electrostatic Discharge Damage.
-
Grasp the handle on the faceplate of the fan tray with one hand and
place the other hand under the unit to support it. Orient the tray so that
the handle and thumbscrews fans are on the right side, toward the outer edge
of the router.
-
Slide the tray into the slot.
-
Tighten the thumbscrews to seat the fan tray firmly in the chassis.
Figure 27: Install the Fan Tray
[Contents]
[Prev]
[Next]
[Report an Error]
