 | Copyright © 1998-2003, Juniper Networks, Inc. All Rights Reserved. | |
The FEB installs into the midplane from the rear of the chassis, as shown in Figure 3. It weighs approximately 7 lb (3.2 kg). The FEB is field-replaceable, but you must power down the router before removing it from the chassis. Packet forwarding halts until the FEB is replaced, the router is powered on, and the Routing Engine finishes booting.
To replace the FEB, perform the following procedures:
| Copyright © 1998-2003, Juniper Networks, Inc. All Rights Reserved. | |