Troubleshoot FPCs
As soon as an FPC is seated on an operating router, the Routing Engine downloads the FPC software to it. The FPC then runs diagnostics and enables the PICs that it houses. During this time, the green FPC LED labeled
OKon the craft interface is blinking. When the FPC is online and functioning normally, theOKLED lights steadily.To troubleshoot FPCs, follow these guidelines:
- If the red FPC LED labeled
FAILlights steadily, make sure the FPC is properly seated in the backplane—use a Phillips screwdriver to check that the screws at the top and bottom of the card carrier are tight.- Issue the CLI
show chassis fpccommand to check the status of installed FPCs. As shown in the sample output, the valueOnlinein the column labeledStateindicates that the FPC is functioning normally:user@host> show chassis fpcTemp CPU Utilization (%) Memory Utilization (%)Slot State (C) Total Interrupt DRAM (MB) Heap Buffer0 Online 28 1 0 8 9 151 Online 27 1 0 8 9 152 Online 29 1 0 8 12 143 Empty4 Empty5 Online 25 0 0 8 8 146 Online 29 1 0 8 9 147 Online 26 1 0 8 8 13For more detailed output, add the
detailoption. The following example also specifies a slot number (0), which is optional:user@host> show chassis fpc detail 0Slot 0 information:State OnlineLogical slot 0Temperature 28 degrees C / 82 degrees FTotal CPU DRAM 8 MBTotal SRAM 1 MBTotal SDRAM 128 MBTotal notification SDRAM 24 MBI/O Manager ASIC information Version 1.1, Foundry IBM, Part number 0Start time: 2003-05-23 18:14:31 PDTUptime: 34 days, 6 hours, 9 minutes, 5 seconds