Install the Routing Engine Housing

To return the Routing Engine housing to the chassis, follow this procedure (see Figure 82):

1. Attach an ESD strap to your bare wrist and connect the strap to one of the ESD points on the chassis.
2. Place one hand underneath the unit to support it and grasp a handle on the front of the unit with the other hand.
3. Align the rear of the unit with the slide guides in the chassis.
4. Slide the unit completely into the chassis.
5. Using a Phillips screwdriver, tighten the screws along the left and right edges of the Routing Engine housing (six in all).

Figure 82: Install the Routing Engine Housing