Tools and Parts Required

To replace network and power cords, cables, and wiring, you need the following tools and parts:

• Phillips (+) screwdrivers, numbers 1 and 2
• Phillips (+) screwdriver, 2.5 mm (for alarm relay contacts)
• Flat-blade (-) screwdriver, 2.5 mm (for serial cable connector)
• ESD grounding wrist strap
• Wire cutters
• 7/16-in. nut driver or wrench for tightening nuts to terminal studs on a DC power supply; if 7/16-in. tool is not available, use pliers or an adjustable wrench rather than a metric nut driver or wrench
• Rubber safety cap to cover the PIC cable connector for each PIC fiber-optic cable removed