AC Power Cord Specifications

Two detachable AC power cords, each 2.5 m (approximately 8 ft) long, are supplied with the router. The appliance coupler at the female end of the cord inserts into the appliance inlet on the faceplate of the AC power supply. The coupler is type C19 as described by International Electrotechnical Commission (IEC) standard 60320. The plug at the male end of the power cord fits into the power source receptacle that is standard for your geographical location.

In North America, AC power cords must not exceed 4.5 m (approximately 14.75 ft) in length, to comply with National Electrical Code (NEC) Sections 400-8 (NFPA 75, 5-2.2) and 210-52, and Canadian Electrical Code (CEC) Section 4-010(3). The cords supplied with the router are in compliance.

Table 12 lists specifications for AC power cords and Figure 18 shows the types of plugs used in different regions.

Table 12: AC Power Cable Specifications

Country	Electrical Specification	Plug Type
Australia	240 VAC, 50 Hz AC	SAA/3
China	220 VAC, 50 Hz AC	CH2-16P
Europe	220 or 230 VAC, 50 Hz AC	VII
Italy	230 VAC, 50 Hz AC	I/3/16
North America	208 VAC, 60 Hz AC	NEMA 6-20P
United Kingdom	240 VAC, 50 Hz AC	BS89/3

Figure 18: AC Plug Types