Reinstall the Routing Engine Housing

The Routing Engine resides in a metal housing in the rear of the chassis, below the fan tray (see Figure 2). To reinstall the Routing Engine housing, follow this procedure (see Figure 45):

1. Attach an ESD strap to your bare wrist and connect the strap to one of the ESD points on the chassis.
2. Place one hand underneath the unit to support it and grasp a handle on the front of the unit with the other hand.
3. Align the rear of the unit with the slide guides in the chassis.
4. Slide the unit completely into the chassis.
5. Using a Phillips screwdriver, tighten the screws along the left and right edges of the Routing Engine housing (six in all).

Figure 45: Reinstall the Routing Engine Housing