Software release
- JUNOS 5.6 and later
Description
- Power requirement: 0.17 A @ 48 V (8 W)
- Three versions:
- 4 multilink bundles, 256 LFI links
- 32 multilink bundles, 256 LFI links
- 128 multilink bundles, 256 LFI links
- Multilink bonding, link fragmentation and interleaving (LFI), and tunneling
Hardware features
- Rate limiting/policing per multilink bundle
- Byte-wise load balancing across multilink bundles
- Bonding T1 links enable service ranging from 1.5 Mbps through 12 Mbps
- Bonding E1 links enable service ranging from 2 Mbps through 16 Mbps
- Loopback function that encapsulates and de-encapsulates packets
Software features For a list of the software features available for services PICs, see the JUNOS Services Interfaces Configuration Guide.
- Protocol support:
- Multilink PPP (MLPPP)
- Multilink Frame Relay (MLFR)—FRF.15 and FRF.16
- Link fragmentation and interleaving (LFI)—FRF.12
- LFI over MLPPP
- IP-IP unicast tunneling
- GRE unicast tunneling
- PIM sparse mode unicast tunneling
LEDs One bicolor:
- Off—PIC is offline
- Green—PIC is online and at least one configured bundle is operating
- Amber—PIC is online, but no configured bundles are operating
