List of Figures

Figure 1: Front of Chassis

Figure 2: Rear of Chassis

Figure 3: Midplane

Figure 4: Front of Chassis with FPCs Installed

Figure 5: FPC Edges

Figure 6: Do Not Grasp the Connector Edge

Figure 7: Do Not Carry an FPC with Only One Hand

Figure 8: Do Not Rest the FPC on an Edge

Figure 9: Holding an FPC Vertically

Figure 10: Holding an FPC Horizontally

Figure 11: Do Not Stack FPCs

Figure 12: System and Switch Board

Figure 13: SSB Faceplate

Figure 14: Routing Engine

Figure 15: Routing Engine Panel

Figure 16: Craft Interface

Figure 17: AC Power Supply

Figure 18: DC Power Supply

Figure 19: Airflow Through the Chassis

Figure 20: System Architecture

Figure 21: Packet Forwarding Engine Components and Data Flow

Figure 22: Routing Engine Architecture

Figure 23: Control Packet Handling for Routing and Forwarding Table Updates

Figure 24: Typical Center-Mount Rack

Figure 25: Chassis Dimensions and Clearance Requirements

Figure 26: Unpacking the Router

Figure 27: Chassis with Front-Mounting Brackets and Cable Management System

Figure 28: Power Switch in the Off Position on a DC Power Supply

Figure 29: Removing a Power Supply

Figure 30: Removing a Routing Engine

Figure 31: Removing the Routing Engine Panel and Fan Tray

Figure 32: Removing an SSB

Figure 33: Removing a Front Fan Tray

Figure 34: Removing an FPC

Figure 35: Installing the Chassis in a Rack

Figure 36: Reinstalling an FPC

Figure 37: Reinstalling an SSB

Figure 38: Reinstalling a Front Fan Tray

Figure 39: Reinstalling the Routing Engine Panel and Fan Tray

Figure 40: Reinstalling a Routing Engine

Figure 41: Power Switch in the Off Position on a DC Power Supply

Figure 42: Reinstalling a Power Supply

Figure 43: Routing Engine Management Ports and Alarm Relay Contacts

Figure 44: Routing Engine Ethernet Cable Connector

Figure 45: Console and Auxiliary Serial Port Connector

Figure 46: Attaching Cable to a PIC

Figure 47: Connecting DC Power and Grounding Cables

Figure 48: Removing the Craft Interface

Figure 49: Installing the Craft Interface

Figure 50: Routing Engine Interface Ports and Alarm Relay Contacts

Figure 51: Ethernet Cable Connector

Figure 52: Serial Port Connector

Figure 53: Removing a Front Fan Tray

Figure 54: Installing a Front Fan Tray

Figure 55: Removing the Routing Engine Panel and Fan Tray

Figure 56: Installing the Routing Engine Panel and Fan Tray    

Figure 57: Removing an FPC

Figure 58: Installing an FPC

Figure 59: Connecting Fiber-Optic Cable to a PIC

Figure 60: Removing a PIC

Figure 61: Installing a PIC

Figure 62: Small Form-Factor Pluggable (SFP)

Figure 63: Removing an SSB

Figure 64: Installing an SSB

Figure 65: Removing an AC Power Supply

Figure 66: Installing an AC Power Supply

Figure 67: Press the Power Switch to the Off Position on a DC Power Supply

Figure 68: Disconnecting Power Cables from a DC Power Supply

Figure 69: Removing a DC Power Supply

Figure 70: Power Switch in the Off Position on a DC Power Supply

Figure 71: Installing a DC Power Supply

Figure 72: Connecting Power Cables to a DC Power Supply

Figure 73: Installing the Protective Shield on a DC Power Supply

Figure 74: Disconnecting DC Power Cables

Figure 75: Connecting DC Power and Grounding Cables

Figure 76: Removing the PC Card

Figure 77: Inserting the PC Card

Figure 78: Removing a Routing Engine

Figure 79: Installing a Routing Engine

Figure 80: Placing a Component into an Electrostatic Bag

Figure 81: DC Power and Grounding Cable Lug

Figure 82: AC Plug Types

Figure 83: DC Power and Grounding Cable Connections

Figure 84: Serial Number ID Label 

Figure 85: Craft Interface Serial Number ID Label

Figure 86: FPC Serial Number ID Label

Figure 87: PIC Serial Number ID Label

Figure 88: Power Supply Serial Number ID Label

Figure 89: Routing Engine 333 Serial Number ID Label

Figure 90: Routing Engine 600 Serial Number ID Label

Figure 91: SSB Serial Number ID Label 

Figure 92: EIA-530 PIC

Figure 93: Fast Ethernet 12-port PIC

Figure 94: VHDCI to RJ-21 Cable