Installing the Routing Engine Panel and Fan Tray

To install the Routing Engine panel and fan tray, follow this procedure (see Figure 56):

1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and connect the strap to one of the ESD points on the chassis. Verify that the router is attached to a proper earth ground. For more information about ESD, see Preventing Electrostatic Discharge Damage.
2. Grasp the handle on the faceplate of the unit with one hand and place the other hand under the unit to support it.
3. Slide the unit into the chassis.
4. Tighten the thumbscrews to seat the unit firmly in the chassis.

Figure 56: Installing the Routing Engine Panel and Fan Tray