Software release
- JUNOS 5.4 and later
Description
- Active and passive traffic monitoring
- Power requirement: 0.19 A/48 V @ 9 W
- Monitors IPv4 packets
- Support for collecting and exporting cflowd records
Note: On the M5, M10, M20, M40, and M160 routers, this PIC requires an Enhanced FPC. See the hardware guide for your router for more information.
Hardware features
- Monitors up to 100,000 packets per second
- Support for MTUs up to 4474 bytes for SONET interfaces
Software features
- Load distribution across multiple PICs
- cflowd version 5 support
- Provides start and end times of each export
- Supports firewall filtering and filter-based forwarding (FBF)
- Encapsulations:
- High-level Data Link Control (HDLC)
- Point-to-Point Protocol (PPP)
Note: Extended support for graceful Routing Engine switchover (GRES) has been added for this PIC. To configure GRES, you must be running JUNOS release 7.3 or later.
Cables and connectors
- DB-9 diagnostic serial console port
LEDs Status LED, one tricolor:
- Off—PIC is offline and it is safe to remove it from the chassis
- Green—PIC is operating normally
- Amber—PIC is initializing
- Red—PIC has an error or failure and no further harm can be done by removing it from the chassis
Application LED, one tricolor:
- Off—Flow collector is not running
- Green—Flow collector is running under acceptable load
- Amber—Flow collector is overloaded
