Removing the PC Card

The PC card is inserted in the slot labeled PC CARD in the Routing Engine faceplate. To remove the PC card, follow this procedure (see Figure 83):

1. Remove the rear component cover by loosening the thumbscrew at each corner of the cover and pulling it straight off the chassis. For complete instructions, see Removing the Rear Component Cover.
2. Press the eject button located next to the PC card slot in the Routing Engine faceplate. Note that the PC card slot might be located in a different position from that shown in Figure 83.
3. When the PC card pops partially out of the slot, grasp the card and pull it straight out of the slot.