Insert the PC Card

To insert the PC card, follow this procedure (see Figure 84):

1. Orient the PC card with the Juniper Networks logo facing in the direction specified on the Routing Engine faceplate. Insert the card into the slot.
2. Press the card firmly all the way into the slot. Note that the PC card slot might be located in a different position from that shown in Figure 84.
3. Reinstall the rear component cover and tighten the thumbscrew at each corner to secure it to the chassis. For complete instructions, see Reinstalling the Rear Component Cover.

   To maintain proper airflow and provide electromagnetic shielding, do not operate the router without the rear component cover in place.