Symbols
- ( ), in syntax descriptions 1
- [ ], in configuration statements 1
- { }, in configuration statements 1
- #, comments in configuration statements 1
- < >, in syntax descriptions 1
- | (pipe), in syntax descriptions 1
A
- agency approvals 1
- air filter
- cleaning instructions 1
- description (hardware and function) 1, 2
- installation instructions 1
- maintenance 1
- removal instructions 1
- routine inspection of 1
- tools required 1
- weight 1
- airflow
- path through chassis 1
- required clearance around chassis for 1
- alarm
- messages, list of 1
- relay contacts
- connecting/disconnecting wire 1
- alarms
- cutoff/lamp test button 1
- handling by Routing Engine 1
- LEDs (red and yellow) on craft interface 1
- mode for LCD 1
- altitude, acceptable range 1
- antistatic mat, using 1
- application-specific integrated circuit 1
- approvals, agency 1
- architecture
- overview 1
- Packet Forwarding Engine 1
- Routing Engine 1
- ASIC
- as key element of router design 1
- Distributed Buffer Manager
- component on SFM 1
- I/O Manager
- component on FPC 1
- Internet Processor II
- component on SFM 1
- on FPC 1
- on PIC 1
- on SFM 1
- Packet Director
- component on FPC 1
- ATM analyzer, use of 1
- attenuation in fiber-optic cable 1
- auxiliary port (for Routing Engine management)
- cable
- connection during initial installation 1
- description 1
B
- BITS input ports on CIP 1
- braces, in configuration statements 1
- brackets
- angle, in syntax descriptions 1
- square, in configuration statements 1
C
- cable
- auxiliary or console port (for Routing Engine management)
- connecting during initial installation 1
- Ethernet port (for Routing Engine management)
- connecting during initial installation 1
- fiber-optic
- attenuation 1
- grounding 1
- PIC
- connecting during initial installation 1
- power and grounding
- connecting during initial installation 1
- cable management system
- description 1
- fiber-optic cable, use with 1
- weight 1
- carton 1
- case number, for JTAC 1
- center-mount rack 1
- chassis
- airflow path through 1
- alarm messages 1
- description 1
- grounding points 1
- lifting guidelines 1
- process (software module in Routing Engine) 1
- weight 1
- checklist
- FPC removal 1
- checklist for site preparation 1
- chromatic dispersion in fiber-optic cable 1
- CIP
- alarm relay contacts 1
- BITS input ports 1
- installation instructions 1
- removal instructions 1
- Routing Engine management ports 1
- serial number 1
- circuit breaker box
- description (hardware and function) 1
- installation instructions 1
- removal instructions 1
- tools required 1
- cleaning instructions
- air filter 1
- fiber-optic transceivers 1
- clearance, around rack 1
- CLI
- as troubleshooting tool 1
- command
- to display/switch master host module 1
- tools provided in
- for accessing and controlling software 1
- clock source, SONET/SDH 1
- command-line interface 1
- commands
- ping 1
- request chassis routing-engine master switch 1
- show chassis alarms 1
- show chassis environment mcs 1
- show chassis environment pcg 1
- show chassis environment pem 1
- show chassis fpc 1
- show chassis fpc pic-status 1
- show chassis hardware 1
- show chassis routing-engine 1
- show chassis sfm 1
- traceroute 1
- comments, in configuration statements 1
- compatibility, electromagnetic 1
- compliance
- EMC requirements 1
- general standards 1
- components
- hardware 1
- hot-pluggable 1
- hot-removable and hot-insertable 1
- redundancy 1
- requiring power-down 1
- software 1
- configuration
- files, storage by Routing Engine 1
- router 1
- Connector Interface Panel 1
- console port (for Routing Engine management)
- cable
- connection during initial installation 1
- description 1
- control packets, handling of 1
- conventions
- notice icons 1
- text and syntax 1
- cooling system 1
- craft interface
- alarm cutoff/lamp test button 1
- description (hardware and function) 1
- installation instructions 1
- LCD 1
- LEDs
- alarm (red and yellow) 1
- removal instructions 1
- routine inspection of 1
- serial number 1
- tools required 1
- crate 1
- curly braces, in configuration statements 1
- customer support 1
D
- data flow, through Packet Forwarding Engine 1
- DB-9 cable connector pinouts (auxiliary and console ports) 1
- dispersion in fiber-optic cable 1
- Distributed Buffer Manager ASIC
- component on SFM 1
- role in forwarding 1
- documentation set
- comments on 1
E
- E1 PIC, pinouts for RJ-48 cable 1
- earthquakes
- site preparation for 1
- tested toleration for seismic 1
- EIA-530 PIC, pinouts for X.21 cable 1, 2
- EIA rack standards 1
- electricity
- safety warnings 1
- site wiring guidelines 1
- electromagnetic
- compatibility 1
- pulse 1
- electrostatic
- bag, using to store components 1
- discharge 1
- EMC (EMI)
- compliance with requirements 1
- standards 1
- suppression 1
- EMP 1
- environmental specifications 1
- ESD
- points on chassis 1
- preventing damage to components by 1
- Ethernet port (for Routing Engine management)
- cable
- connection during initial installation 1
- description 1
- ETSI rack standards 1
- exception packets, handling of 1
F
- fan tray
- installation instructions
- during initial installation 1
- maintenance 1
- removal instructions
- during initial installation 1
- tools required 1
- troubleshooting 1
- weight 1
- Fast Ethernet 48-port PIC, pinouts for RJ-21 cable 1
- fiber-optic cable 1
- field-replaceable units (FRUs) 1
- fire safety specifications 1
- Flexible PIC Concentrator 1
- font conventions 1
- forwarding tables 1
- FPC
- ASICs on 1
- blank panels 1
- components 1
- description (hardware and function) 1
- installation instructions
- during initial installation 1
- LEDs 1
- offline button 1
- removal instructions
- during initial installation 1
- serial number 1
- tools required 1
- troubleshooting 1
- types (FPC1 and FPC2) 1
- weight 1
- FPC1 and FPC2 1
- FPCs
- maintenance 1
- status, checking 1
- front impeller assembly
- installation instructions
- during initial installation 1
- maintenance 1
- removal instructions
- during initial installation 1
- tools required 1
- troubleshooting 1
- weight 1
- front-mount rack 1
- FRUs 1
- fuses
- description (hardware and function) 1
- replacement of blown 1
- use in troubleshooting 1
G
- grounding (electrical) specifications
- DC-powered router 1
- grounding cables
- lugs 1
- guidelines 1
H
- hardware components
- FPC 1
- host module 1
- MCS 1
- midplane 1
- overview 1
- PCG 1
- PIC 1
- power requirements 1
- reinstallation of all during initial installation 1
- removal of all during initial installation 1
- returning for repair or replacement 1
- Routing Engine 1
- SFM 1
- weight 1
- higher-order mode loss (HOL) 1
- host module 1
- hot-pluggable components 1
- hot-removable and hot-insertable components 1
- humidity (relative), acceptable 1
I
- I/O Manager ASIC
- on FPC 1
- role in forwarding 1
- immunity standards 1
- impeller assembly 1
- installation instructions
- air filter 1
- alarm relay contact wires
- during initial installation 1
- cable, auxiliary or console port (for Routing Engine management)
- during initial installation 1
- cable, Ethernet port (for Routing Engine management)
- during initial installation 1
- cable, PIC
- during initial installation 1
- chassis using mechanical lift 1
- chassis without mechanical lift 1
- CIP 1
- circuit breaker box 1
- craft interface 1
- fan tray
- during initial installation 1
- FPC
- during initial installation 1
- front impeller assembly
- during initial installation 1
- fuses 1
- MCS
- during initial installation 1
- PC card 1
- PCG
- during initial installation 1
- PIC 1
- power and grounding cables
- during initial installation 1
- power supply
- during initial installation 1
- rear component cover 1
- rear lower impeller assembly
- during initial installation 1
- rear upper impeller assembly
- during initial installation 1
- router
- preparation for 1
- Routing Engine
- during initial installation 1
- SFM
- during initial installation 1
- SFP 1
- instructions
- calculation
- power requirements 1
- cleaning 1
- installation 1
- maintenance 1
- packing
- router for shipment 1
- removal 1
- site preparation 1
- unpack the router 1
- interface
- command-line 1
- network 1
- process (software module in Routing Engine) 1
- interference
- electromagnetic 1
- radio frequency 1
- Internet Processor II ASIC
- component on SFM 1
- role in forwarding 1
J
- Juniper Networks Technical Assistance Center (JTAC) 1
- JUNOS Internet software
- chassis process 1
- CLI 1
- interface process 1
- kernel (Routing Engine) 1
- management process 1
- MIB II process 1
- modularity and scalability 1
- overview 1
- role in system architecture 1
- routing protocol process 1
- SNMP process 1
- tools
- for accessing and configuring 1
- upgrade of 1
- VPNs 1
K
- kernel (software in Routing Engine) 1
L
- laser safety guidelines 1
- LCD on craft interface
- alarm mode 1
- description 1
- idle mode 1
- LEDs
- alarm (red and yellow on craft interface)
- description 1
- FPC 1
- host module 1
- MCS 1
- PCG 1
- PIC 1
- power supply 1
- Routing Engine 1
- safety warnings 1
- SFM 1
- lifting handle (for installation) 1
- link loss, calculating 1
- load sharing (power supplies) 1
- lugs for grounding cables 1
- lugs for power and grounding cables 1
M
- maintenance guidelines
- air filter 1
- cable
- PIC 1
- cooling system 1
- fan tray 1
- FPC 1
- host module 1
- impeller assemblies 1
- MCS 1
- overview 1, 2
- PCG 1
- PIC 1
- power supply 1
- Routing Engine 1
- SFM 1
- warnings 1
- management
- port, Ethernet 1
- process (software module of Routing Engine) 1
- manuals
- comments on 1
- MCS
- components 1
- description (hardware and function) 1
- installation instructions
- during initial installation 1
- LEDs 1
- maintenance 1
- offline button 1
- removal instructions
- during initial installation 1
- serial number 1
- status, displaying 1
- tools required 1
- weight 1
- MIB II process (software module in Routing Engine) 1
- midplane
- description 1
- power supply connectors to 1
- Miscellaneous Control Subsystem 1
- modal dispersion in fiber-optic cable 1
- mode loss, higher-order 1
- MPLS protocols 1
- multicast routing protocols 1
- multimode fiber-optic cable 1
N
- NEBS standards 1
- network cable 1
- notice icons 1
O
- offline button
- FPC 1
- MCS 1
- PCG 1
- PIC 1
- SFM 1
P
- Packet Director ASIC
- component on FPC 1
- role in forwarding 1
- Packet Forwarding Engine
- architectural components 1
- ASICs, diagram of 1
- Clock Generator 1
- data flow through 1
- hardware components listed 1
- packing crate 1
- parentheses, in syntax descriptions 1
- PC card
- insertion instructions 1
- removal instructions 1
- PCG
- components 1
- description (hardware and function) 1
- installation instructions
- during initial installation 1
- LEDs 1
- maintenance 1
- offline button 1
- removal instructions
- during initial installation 1
- serial number 1
- status, checking 1
- tools required 1
- weight 1
- PFE 1
- Physical Interface Card 1
- PIC
- ASIC on 1
- ATM, use of analyzer 1
- cable
- installation instructions 1
- components 1
- description (hardware and function) 1
- E1, pinouts for RJ-48 cable 1
- EIA-530, pinouts for X.21 cable 1, 2
- Fast Ethernet 48-port, pinouts for RJ-21 cable 1
- installation instructions 1
- LEDs 1
- maintenance 1
- offline button 1
- removal instructions 1
- serial number 1
- SONET/SDH
- alarm messages 1
- status, checking 1
- T1, pinouts for RJ-48 cable 1
- tools required 1
- troubleshooting 1
- ping command 1
- pinouts
- DB-9 cable connector ports (auxiliary/console) 1
- RJ-21 cable 1
- RJ-45 Ethernet cable connector port 1
- RJ-48 cable 1
- V.35 cable 1
- X.21 cable 1
- policy, routing 1
- port
- auxiliary 1
- BITS input 1
- console on CIP 1
- Ethernet 1
- power
- budget calculation 1
- connecting
- for maintenance or replacement 1
- connecting to the router 1
- disconnection instructions 1
- margin calculation 1
- requirements for hardware components 1
- supply 1
- surges 1
- system
- load sharing 1
- power and grounding cables
- connection instructions
- during initial installation 1
- disconnection instructions 1
- lugs 1
- specifications 1
- tools required 1
- power supply
- cables 1
- connectors to midplane 1
- description and specifications 1
- grounding 1
- installation instructions
- during initial installation 1
- maintenance 1
- removal instructions
- during initial installation 1
- serial number 1
- tools required 1
- troubleshooting 1
- weight 1
- procedures See instructions 1
R
- rack
- clearance around, required 1
- mounting hole spacing 1
- securing to building 1
- size and strength required 1
- standards, EIA and ETSI 1
- radio frequency interference, preventing 1
- rear component cover
- installation instructions 1
- removal instructions 1
- rear lower impeller assembly
- installation instructions
- during initial installation 1
- maintenance 1
- removal instructions
- during initial installation 1
- tools required 1
- troubleshooting 1
- weight 1
- rear upper impeller assembly
- installation instructions
- during initial installation 1
- maintenance 1
- removal instructions
- during initial installation 1
- tools required 1
- troubleshooting 1
- weight 1
- redundancy
- components 1
- cooling system 1
- power system 1
- regulatory compliance 1
- relative humidity, acceptable 1
- removal instructions
- air filter 1
- alarm relay contact wires 1
- cable
- auxiliary or console port (for Routing Engine management) 1
- CIP 1
- circuit breaker box 1
- craft interface 1
- fan tray
- during initial installation 1
- FPC
- during initial installation 1
- front impeller assembly
- during initial installation 1
- fuses 1
- MCS
- during initial installation 1
- PC card 1
- PCG
- during initial installation 1
- PIC 1
- power and grounding cables 1
- power supply
- during initial installation 1
- rear component cover 1
- rear lower impeller assembly
- during initial installation 1
- rear upper impeller assembly
- during initial installation 1
- Routing Engine
- during initial installation 1
- SFM
- during initial installation 1
- SFP 1
- repair of router or components 1
- replacement instructions 1
- request chassis routing-engine master switch command 1
- requirements 1
- reset button on Routing Engine 1
- RFI 1
- RJ-21 cable pinouts 1
- RJ-45 cable connector pinouts 1
- RJ-48 cable pinouts 1
- router
- configuration 1
- routing
- policy 1
- protocol process (software module of Routing Engine) 1
- protocols
- IPv4 1
- tables 1
- Routing Engine
- alarm handling by 1
- chassis process 1
- components
- hardware 1
- configuration files, storage 1
- description (hardware and function) 1
- installation instructions
- during initial installation 1
- interface process 1
- kernel 1
- LEDs 1
- maintenance 1
- management ports 1
- management process 1
- MIB II process 1
- packet counting 1
- pinouts for cable connections 1
- removal instructions
- during initial installation 1
- reset button 1
- role in system architecture 1
- routing
- protocol process 1
- serial number 1
- SNMP process 1
- status, displaying 1
- tools required 1
- weight 1
S
- safety information 1
- safety standards 1
- seismic (earthquake), designed level 1
- self-test button
- power supply 1
- serial number
- CIP 1
- craft interface 1
- FPC 1
- in output from show chassis hardware command 1
- MCS 1
- PCG 1
- PIC 1
- power supply 1
- Routing Engine 1
- SFM 1
- SFM
- ASICs on 1
- components 1
- description (hardware and function) 1
- installation instructions
- during initial installation 1
- LEDs 1
- maintenance 1
- offline button 1
- removal instructions
- during initial installation 1
- serial number 1
- status, checking 1
- tools required 1
- weight 1
- SFP
- installation instructions 1
- removal instructions 1
- shipping crate
- repacking 1
- unpacking the router 1
- show chassis alarms command 1
- show chassis environment mcs command 1
- show chassis environment pcg command 1
- show chassis environment pem command 1
- show chassis fpc command 1
- show chassis fpc pic-status command 1
- show chassis hardware command 1
- show chassis routing-engine command 1
- show chassis sfm command 1
- signal dispersion 1
- signaling, distance limitations 1
- Simple Network Management Protocol 1
- single-mode fiber-optic cable 1
- site
- electrical wiring specifications 1
- environmental specifications 1
- preparation
- checklist 1
- routine inspection 1
- small form factor pluggable 1
- SNMP
- as tool for monitoring 1
- process (software module in Routing Engine) 1
- software, JUNOS 1
- SONET/SDH analyzer, use of 1
- specifications
- cable 1
- clearance around rack 1
- electrical 1
- environmental 1
- fire safety 1
- power
- drawn by hardware components 1
- power supply 1
- rack
- connection to building structure 1
- thermal output 1, 2
- wires to external alarm-reporting devices 1
- standards compliance 1
- support, technical 1
- surge protection 1
- Switching and Forwarding Module 1
- syntax conventions 1
- system
- architecture 1
- description 1
T
- T1 PIC, pinouts for RJ-48 cable 1
- tables, routing and forwarding 1
- technical support
- contacting JTAC 1
- telco rack 1
- temperature, acceptable range 1
- thermal output 1, 2
- tolerances 1
- tools required
- chassis
- installation using mechanical lift 1
- CIP maintenance 1
- hardware components
- returning for repair or replacement 1
- traceroute command 1
- transmission distances, fiber-optic cable 1
- troubleshooting
- CLI commands 1
- cooling system 1
- FPC 1
- fuses 1
- LEDs
- craft interface 1
- overview 1
- PIC 1
- power system 1
U
- U (rack unit) 1
- unicast routing protocols
- IPv4 1
- IPv6 1
V
- V.35 cable pinouts 1
W
- warnings
- electrical 1
- general 1
- installation 1
- laser and LED 1
- levels defined 1
- maintenance and operational 1
- wavelength ranges supported by fiber-optic cable 1
- weight
- chassis 1
- hardware components 1
- wiring, electrical 1
X
- X.21 cable pinouts 1