Symbols
- #, comments in configuration statements 1
- ( ), in syntax descriptions 1
- 4-Port Fast Ethernet ePIM 1
- 4-Port ISDN BRI S/T PIM
- description 1
- PIM ONLINE LED 1
- 4-Port ISDN BRI U PIM
- description 1
- PIM ONLINE LED 1
- < >, in syntax descriptions 1
- [ ], in configuration statements 1
- { }, in configuration statements 1
- | (pipe), in syntax descriptions 1
A
- AC plug types 1
- AC power
- connecting power 1
- cords See AC power cords
- dedicated AC power feed requirement 1
- electrical specifications 1, 2
- grounding the router 1
- installing a J6350 power supply 1
- J2320 system 1
- J2350 system 1
- J4350 system 1
- J6350 system 1
- removing a J6350 power supply 1
- requirements 1
- safety guidelines 1
- AC power cords
- electrical specifications 1
- physical requirements 1
- plug types 1
- replacing 1
- accident, steps to take 1
- ACTIVITY LED (Dual-Port Fast Ethernet PIM) 1
- adapter, console port
- chassis 1, 2
- adapters, for compact flash recovery 1
- addresses
- ge-0/0/0 for autoinstallation 1
- loopback 1
- management interface 1
- ADSL PIM
- description 1
- PIM ONLINE LED 1
- ADSL ports
- description 1
- LED states 1
- RJ-11 connector pinouts 1
- agency approvals 1
- air filter
- description 1, 2
- location 1
- replacing 1
- airflow
- description 1
- space requirement 1
- ALARM LED
- description 1, 2
- indications 1
- alarms
- conditions, in chassis components 1
- LED 1, 2
- alternative boot media See boot devices; USB
- altitude requirement 1
- Annex A; Annex B See ADSL; SHDSL
- antistatic mat 1
- approvals, agency 1
- asymmetric digital subscriber line See ADSL
- AT modem command 1, 2
- AT&D1 modem command 1
- AT&K0 modem command 1
- AT&W modem command 1
- ATDT modem command 1
- ATS0=1 modem command 1
- AUX port 1, 2
- auxiliary console port 1, 2
B
- backup compact flash, removing 1
- backup router
- defining (configuration editor) 1
- description 1
- basic connectivity
- CLI configuration editor 1
- establishing 1
- J-Web configuration editor 1
- Quick Configuration 1
- requirements 1
- sample configuration 1
- verifying 1
- battery
- environmental compliance 1
- handling 1
- lithium 1
- blank panel
- for PIM slots 1
- for power supply (J6350) 1
- blinking
- Fast Ethernet port ACTIVITY LED state (dual-port PIM) 1
- Fast Ethernet port link activity LED state (4-port ePIM) 1
- Gigabit Ethernet port LED 1
- Gigabit Ethernet port TX/RX LED state 1, 2, 3
- ISDN BRI ONLINE LED state 1
- POWER LED state 1, 2
- STATUS (router) LED state 1, 2
- boot devices 1, 2
- external compact flash 1
- boot process, backup router for 1
- boot sequence 1, 2
- braces, in configuration statements 1
- brackets
- angle, in syntax descriptions 1
- square, in configuration statements 1
- BTUs per hour 1
- built-in Ethernet ports See Gigabit Ethernet ports
- buttons
- power 1, 2
- RESET CONFIG 1
C
- cables
- AC power See AC power cords
- ADSL RJ-11 pinouts 1
- arranging for safety 1
- chassis console port, DB-9 connector pinouts 1
- chassis console port, RJ-45 connector pinouts 1
- connecting to network media 1
- console port cable (chassis), connecting 1, 2
- console port cable (chassis), replacing 1
- console port, connecting 1
- DC cables See DC power cables
- disconnecting PIM cables 1
- E1 RJ-48 pinouts 1
- Ethernet cable, connecting 1, 2, 3
- Ethernet rollover, connecting 1
- Fast Ethernet RJ-45 connector pinout 1
- Gigabit Ethernet RJ-45 connector pinouts (ePIM) 1
- Gigabit Ethernet RJ-45 connector pinouts (uPIMs) 1
- grounding 1
- ISDN RJ-45 pinouts 1
- PIM, installing 1
- PIM, removing 1
- reducing radio frequency interference (RFI) 1
- serial EIA-530A DCE pinouts 1
- serial EIA-530A DTE pinouts 1
- serial PIM specifications 1
- serial RS-232 DCE pinouts 1
- serial RS-232 DTE pinouts 1
- serial RS-422/449 (EIA-449) DCE pinouts 1
- serial RS-422/449 (EIA-449) DTE pinouts 1
- serial V.35 DCE pinouts 1
- serial V.35 DTE pinouts 1
- serial X.21 DCE pinouts 1
- serial X.21 DTE pinouts 1
- SHDSL RJ-11 pinouts 1
- T1 RJ-48 pinouts 1
- Canada, compliance statement 1
- case number, for JTAC 1
- channelized E1 PIM 1
- channelized E1 ports
- description 1
- LED states 1
- RJ-48 cable pinouts 1
- channelized T1 PIM 1
- channelized T1 ports
- description 1
- LED states 1
- RJ-48 cable pinouts 1
- chassis
- alarm conditions and remedies 1, 2
- component serial number labels 1, 2
- cover, replacing (J2320 and J2350) 1
- dimensions 1, 2
- environmental tolerances 1
- grounding 1
- heat dissipation 1
- J2320 1
- J2350 1
- J4350 1
- J6350 1
- lifting guidelines 1
- PIM slot numbers 1, 2
- power consumption 1
- power management, planning 1
- power management, troubleshooting 1
- rack requirements 1
- weight 1, 2
- checklist, for site preparation 1
- clear operation, RESET CONFIG button 1
- clear-text access 1
- clearance 1
- CLI configuration editor
- basic settings 1
- initial configuration 1
- comments, in configuration statements 1
- committed configuration
- root password requirement 1
- compact flash
- backup, replacing 1
- description 1, 2
- external, description 1
- external, J2320 and J2350 1
- external, replacing 1
- inserting 1
- internal, recovering 1
- location (horizontal) 1
- location (vertical) 1
- minor (yellow) alarm 1
- recovering 1
See also compact flash recovery
- removing 1
- replacing 1, 2
- replacing, rotating fans warning 1, 2
- compact flash recovery
- adapter for 1
- copying the JUNOS image 1
- reasons for 1
- requirements 1
- compliance
- EMC requirements 1
- general standards 1
- lithium battery 1
- components
- packing for shipment 1
- replacing 1
- serial number label 1, 2
- troubleshooting 1
See also LEDs
- configuration
- clearing with RESET CONFIG button 1
- factory, resetting with RESET CONFIG button 1
- root password requirement 1
- configuration editor See CLI configuration editor; J-Web configuration editor
- connection
- AC power 1
- DC power 1
- for management 1
- network cables 1
- to Services Router 1
- connectivity
- basic See basic connectivity
- hardware 1
- modem (remote) connection 1
- through J-Web 1
- through the CLI locally 1
- through the CLI remotely 1
- console port
- adapter 1
- adapter (chassis) 1, 2
- auxiliary console port 1, 2
- connecting through the CLI locally 1
- connecting through the CLI remotely 1
- description 1, 2
- on chassis, DB-9 connector pinouts 1
- on chassis, RJ-45 connector pinouts 1
- replacing the cable 1
- settings for local CLI connection 1
- settings for modem connection at router for remote CLI access 1
- settings for modem connection for remote CLI access 1
- conventions
- notice icons 1
- text and syntax 1
- cooling system
- airflow requirement 1
- description 1, 2
- Copper Gigabit Ethernet ePIMs
- overview 1
- pinouts 1
- Copper Gigabit Ethernet uPIMs
- overview 1
- pinouts 1
- cords See AC power cords; cables; DC power cables
- cover, replacing (J2320 and J2350) 1
- Crypto Accelerator Module
- description 1, 2
- installing 1, 2
- location 1, 2
- removing 1, 2
- curly braces, in configuration statements 1
- customer support 1
- contacting JTAC 1
- contacting JTAC for hardware return 1
- information required for hardware return 1
- Cygwin, for compact flash recovery 1
D
- datasheets URL 1
- DB-9 connector pinouts
- chassis console port 1
- DB-9 to DB-25 serial port adapter 1
- DC power
- cables See DC power cables
- connecting power 1
- dedicated DC power feed requirement 1
- electrical specifications 1, 2
- grounding requirements and warning 1
- grounding the router 1
- installing a J6350 power supply 1
- J2320 system 1
- J2350 system 1
- J4350 system 1
- J6350 system 1
- power disconnection warning 1
- removing a J6350 power supply 1
- requirements 1
- safety guidelines (general) 1
- safety guidelines, power sources for redundant power supplies 1
- wiring sequence warning 1
- wiring terminations warning 1
- DC power cables
- electrical specifications 1
- physical requirements 1
- replacing 1
- usage warning 1
- dd utility, for compact flash recovery 1
- Declaration of Conformity 1
- default gateway
- description 1
- DHCP (Dynamic Host Configuration Protocol) 1
- DHCP server
- after initial configuration 1
- before initial configuration 1
- diagnosis
- chassis 1
- hardware 1
- dial-up modem connection See modem connection to router console port
- digital certificate See SSL certificates
- digital subscriber line See ADSL; SHDSL
- DIMMs (dual inline memory modules) See DRAM modules
- DNS (Domain Name System) 1
- DNS server
- defining (configuration editor) 1
- defining (Quick Configuration) 1
- function 1
- documentation set
- comments on 1
- domain name 1, 2
- defining (configuration editor) 1
- defining (Quick Configuration) 1
See also DNS server- Domain Name System 1
- domain search
- defining (configuration editor) 1
- defining (Quick Configuration) 1
- DRAM modules
- installing 1
- location 1
- removing 1
- dry chemical fire extinguishers, prohibited 1
- DS1 ports See E1 ports; T1 ports
- DS3 ports See E3 ports; T3 ports
- DSL See ADSL; SHDSL
- dual inline memory modules See DRAM modules
- Dual-Port Channelized T1/E1/ISDN PRI PIM 1
- Dual-Port E1 PIM 1
- Dual-Port E3 PIM 1
- Dual-Port Fast Ethernet PIM 1
- Dual-Port Serial PIM 1
- Dual-Port T1 PIM 1
- Dual-Port T3 PIM 1
E
- E1 ports
- description 1
See also channelized E1 ports
- LED states 1
- RJ-48 cable pinouts 1
- E3 ports
- BNC connector pinouts 1
- description 1
- LED states 1
- earth ground See grounding
- earthquakes
- rack-mount requirements 1
- seismic requirements 1
- EIA-530A DCE cable pinouts 1
- EIA-530A DTE cable pinouts 1
- electrical specifications 1
- electricity
- safety warnings 1
- wiring guidelines 1
- electromagnetic compatibility (EMC) See EMC
- electromagnetic interference (EMI) See See EMI
- electrostatic bag, for storing components 1
- electrostatic discharge, preventing 1
- EMC (electromagnetic compatibility)
- compliance with requirements 1
- preventing problems with 1
- standards 1
- EMI (electromagnetic interference)
- compliance with requirements 1
- standards 1
- suppressing 1
- encrypted access
- through SSH 1
- environmental requirements for operation 1
- ePIMs
- 4-Port Fast Ethernet 1
- Copper Gigabit Ethernet 1
- SFP Gigabit Ethernet 1
- slot locations 1
- EPROM 1, 2
- ESD (electrostatic discharge), preventing 1
- ESD wrist strap
- verifying resistance, for safety 1
- wearing during installation 1
- Ethernet cable
- chassis console DB-9 connector pinouts 1
- chassis console, RJ-45 connector pinouts 1
- connecting the Services Router to a management device 1, 2
- connecting the Services Router to a modem 1
- replacing 1
- Ethernet ports See Fast Ethernet ports See Gigabit Ethernet ports
- Ethernet rollover cable, connecting the router to a management device 1
- European Union, compliance statement 1
- external compact flash See compact flash
F
- failures
- compact flash, USB for 1, 2
- PIM, troubleshooting 1
- Routing Engine fan, troubleshooting 1
- fans
- description 1, 2
See also air filter See also cooling system
- failure, troubleshooting 1
- Fast Ethernet ports
- 4-Port Fast Ethernet ePIM 1
- ACTIVITY status (dual-port PIM) 1
- Dual-Port Fast Ethernet PIM 1
- LED states (4-port ePIM) 1
- LED states (dual-port PIM) 1
- link activity (4-port ePIM) 1
- link status (4-port ePIM) 1
- LINK/ SPEED status (dual-port PIM) 1
- RJ-45 connector pinout 1
- FCC Part 15 compliance statement 1
- FCC Part 68 compliance statement 1
- field-replaceable units, replacing 1
- filter cover See air filter
- filter, air See air filter
- fire extinguishers
- prohibited 1
- required 1
- fire safety requirements 1
- fire suppression
- equipment required 1
- shutdown requirement 1
- font conventions 1
- FPC, PIM slot number in command displays 1, 2
- front panel 1, 2, 3
- FRUs (field-replaceable units), replacing 1
G
- G.SHDSL PIM
- description 1
- PIM ONLINE LED 1
- G.SHDSL ports See SHDSL ports
- gateway, default 1
- ge-0/0/0
- connecting through J-Web 1
- defining address (configuration editor) 1
- for autoinstallation 1
- management interface 1
- Gigabit Ethernet ePIMs
- alarms 1
- description 1
- high-speed slot locations 1
- installation 1
- LEDs 1
- limitations 1
- link speeds and transmission modes 1
- SFP, optical interface support 1
- Gigabit Ethernet ports
- built-in 1, 2
- copper 1
- LED states 1, 2, 3, 4
- port 0 1
- RJ-45 connector pinouts (ePIM) 1
- RJ-45 connector pinouts (uPIMs) 1
- SFP (optical) 1, 2
- Gigabit Ethernet uPIMs
- alarms 1
- description 1
- installation 1
- LEDs 1
- limitations 1
- link speeds and transmission modes 1
- SFP, optical interface support 1
- glossary
- basic connectivity 1
- PIMs 1
- graceful shutdown 1
- grounding
- cable 1
- chassis 1
- DC power requirements and warning 1
- equipment warning 1
- grounding lug
- connecting 1, 2
- gzip utility, for compact flash recovery 1
H
- HA (high availability) LED
- description 1, 2
- hardware
- alarm conditions and remedies 1
- installation and connection 1
- maintenance 1
- PIM overview 1
- product overview 1
- recommended for compact flash recovery 1
- replacing components 1
- returning 1
- supported platforms 1
- troubleshooting components 1
See also LEDs
- hardware features
- components 1
- front panel 1, 2, 3
- PIMs 1
- product overview 1
- Hayes-compatible modem See modem connection to router console port
- heat dissipation, PIMs
- managing 1
- troubleshooting 1
- high-speed interfaces See ePIMs
- high-speed slots for ePIMs, location 1
- hostname 1
- defining (configuration editor) 1
- defining (configuration wizard) 1
- defining (Quick Configuration) 1
- overview 1
See also DNS server- humidity requirement 1
- Hyperterminal, for terminal emulation
- local CLI connection 1
- modem connection at router for remote CLI access 1
- modem connection for remote CLI access 1
I
- immunity standards 1
- initial configuration requirements 1
- injury, steps to take 1
- installation
- AC power supplies (J6350) 1
- air filter 1
- compact flash 1, 2
- console port cable (chassis) 1
- Crypto Accelerator Module 1, 2
- DC power supplies (J6350) 1
- DRAM modules 1
- initial 1
- PIM cables 1
- PIMs 1
- preparation 1
- requirements 1
- restricted access, J2350 1
- restricted access, J4350 and J6350 1, 2, 3, 4
- safety guidelines and warnings 1
- site checklist 1
- site guidelines 1
- USB storage device 1
- Integrated Services Digital Network See ISDN
- interfaces
- J2320 overview 1
- J2320 types supported 1
- J2350 overview 1
- J2350 types supported 1
- J4350 overview 1
- J4350 types supported 1
- J6350 overview 1
- J6350 types supported 1
- ISDN BRI ports
- BRI S/T 1
- BRI U 1
- LED states 1
- provisioning 1
- RJ-45 connector pinouts 1
- ISDN PRI PIM 1
- ISDN provisioning 1
See also ISDN BRI ports
J
- J Series
- establishing software connectivity 1
- hardware replacement 1
- hardware return 1
- installation and connection 1
- models available 1
- network cables and connectors 1
- PIMs 1
- safety and compliance 1
- site preparation 1
- J-Web configuration editor
- basic settings 1
- initial configuration 1
- J-Web interface
- configuration editor See J-Web configuration editor
- connecting 1
- Quick Configuration See Quick Configuration
- J-Web Quick Configuration See Quick Configuration
- J2320
- boot devices 1
- boot sequence 1
- chassis 1
- chassis cover, replacing 1
- compact flash location 1
- compact flash, replacing 1
- cooling system 1
- electrical specifications 1
- external compact flash 1
- fans 1
- front panel 1, 2
- hardware 1, 2
- installation 1
- interfaces supported 1
- mounting brackets 1
- overview 1
- physical specifications 1
- PIMs supported 1
- ports supported 1
- power management 1
- Routing Engine, hardware 1
- USB port 1
- J2350
- air filter, replacing 1
- boot devices 1
- boot sequence 1
- chassis 1
- chassis cover, replacing 1
- compact flash location 1
- compact flash, replacing 1
- cooling system 1
- electrical specifications 1
- external compact flash 1
- fans 1
- front panel 1, 2
- hardware 1, 2
- installation 1
- interfaces supported 1
- mounting brackets 1
- overview 1
- physical specifications 1
- PIMs supported 1
- ports supported 1
- power management 1
- power system 1
- restricted access installation 1
- Routing Engine, hardware 1
- USB port 1
- J4350
- 4-Port Fast Ethernet ePIM 1
- 4-Port ISDN BRI S/T PIM 1
- 4-Port ISDN BRI U PIM 1
- ADSL PIM 1
- air filter, replacing 1
- boot devices 1
- boot sequence 1
- chassis 1
- cooling system 1
- Dual-Port Channelized T1/E1/ISDN PRI PIM 1
- Dual-Port E1 PIM 1
- Dual-Port Fast Ethernet PIM 1
- Dual-Port Serial PIM 1
- Dual-Port T1 PIM 1
- electrical specifications 1
- fans 1
- front panel 1
- FRUs, replacing 1
- G.SHDSL PIM 1
- Gigabit Ethernet ePIM 1
- Gigabit Ethernet uPIMs 1
- hardware 1
- hardware components 1
- hardware, replacing 1
- installation 1
- interfaces supported 1
- mounting brackets, installing 1
- overview 1
- physical specifications 1
- PIM overview 1
- PIMs supported 1
- ports supported 1
- power management 1
- power system 1
- restricted access installation 1, 2, 3, 4
- Routing Engine, hardware 1
- USB port 1
- J6350
- 4-Port Fast Ethernet ePIM 1
- 4-Port ISDN BRI S/T PIM 1
- 4-Port ISDN BRI U PIM 1
- ADSL PIM 1
- air filter, replacing 1
- boot devices 1, 2
- boot sequence 1
- chassis 1
- cooling system 1
- Dual-Port Channelized T1/E1/ISDN PRI PIM 1
- Dual-Port E1 PIM 1
- Dual-Port Fast Ethernet PIM 1
- Dual-Port Serial PIM 1
- Dual-Port T1 PIM 1
- E3 PIM 1
- electrical specifications 1
- fans 1
- front panel 1
- FRUs, replacing 1
- G.SHDSL PIM 1
- Gigabit Ethernet ePIM 1
- Gigabit Ethernet uPIMs 1
- hardware 1
- hardware components 1
- hardware, replacing 1
- installation 1
- interfaces supported 1
- mounting brackets, installing 1
- overview 1
- physical specifications 1
- PIM overview 1
- PIMs supported 1
- ports supported 1
- power management 1
- power supplies See power supplies, J6350
- restricted access installation 1, 2, 3, 4
- Routing Engine, hardware 1
- T3 PIM 1
- USB port 1
- Japan, compliance statement 1
- JTAC (Juniper Networks Technical Assistance Center)
- contacting 1
- contacting for hardware return 1
- information required for hardware return 1
- Juniper Networks Technical Assistance Center See JTAC
- JUNOS CLI
- connecting locally 1
- connecting remotely 1
- JUNOS Software
- establishing connectivity 1
- JUNOScript API
- management access 1
L
- labels, serial number 1, 2
- laptop See management device
- lasers
- beam warning 1
- Class 1 product warning 1
- open aperture warning 1
- safety guidelines 1
- LEDs
- ACTIVITY status (dual-port PIM) 1
- ADSL PIM status 1
- ADSL port status 1
- ALARM 1, 2
- channelized E1 ports 1
- channelized T1 ports 1
- Class 1 product warning 1
- E1 port status 1
- E3 port status 1
- Fast Ethernet port status (4-port ePIM) 1
- Fast Ethernet port status (dual-port PIM) 1, 2
- G.SHDSL PIM status 1
- Gigabit Ethernet port status 1, 2, 3
- HA 1, 2
- ISDN PIM status 1, 2
- ISDN port status 1
- J4350 power supply 1
- J6350 power supply 1
- LAN port status 1, 2
- LINK 1, 2, 3
- link activity (4-Port Fast Ethernet ePIM) 1
- link status (4-port ePIM) 1
- LINK/ SPEED status (Dual-Port Fast Ethernet PIM) 1
- ONLINE status (ADSL PIM) 1
- ONLINE status (G.SHDSL PIM) 1
- ONLINE status (ISDN BRI PIMs) 1
- POWER 1, 2
- safety warnings 1
- serial port status 1
- SHDSL port status 1
- STATUS (router) 1, 2
- T1 port status 1
- T3 port status 1
- TX/RX 1, 2, 3
- lifting guidelines 1
- lightening activity warning 1
- limitations
- compact flash recovery does not recover configuration files 1
- link activity LED (4-Port Fast Ethernet ePIM) 1
- LINK LED 1, 2, 3
- link status LED (4-Port Fast Ethernet ePIM) 1
- LINK/ SPEED LED (Dual-Port Fast Ethernet PIM) 1
- lithium battery compliance 1
- lo0.0 1
- local connection to the router console port 1
- loopback address
- defining (configuration editor) 1
- overview 1
- LX transceiver
- Gigabit Ethernet ePIM 1
- Gigabit Ethernet uPIM 1
M
- maintenance
- AC power cord, replacing 1
- air filter 1
- console port cable (chassis) 1
- Crypto Accelerator Module 1, 2
- DC power cable, replacing 1
- DRAM modules 1
- external compact flash 1
- internal compact flash 1, 2
- PIM cables 1
- PIMs 1
- power system 1
- tools and parts required 1
- USB storage device 1
- warnings 1
- major (red) alarms
- PIMs 1
- Routing Engine 1
- management access 1
- management device
- connecting through the CLI 1, 2
- connecting to console port 1
- connecting to J-Web 1, 2
- recovering root password from 1
- management interface address
- after initial configuration 1
- before initial configuration 1
- defining (configuration editor) 1
- during initial configuration 1
- loopback 1
- management interfaces 1
- management ports 1, 2
See also management interface address; management interfaces
- manuals
- comments on 1
- memory See compact flash; DRAM modules; USB
- midplane 1, 2
- minor (yellow) alarms
- alternative boot device 1
- internal compact flash 1
- Routing Engine 1
- modem commands
- at remote end 1
- at router end 1
- modem connection to router console port
- configuring modem at router end 1
- configuring modem at user end 1
- connecting modem to router 1
- overview 1
- monoammonium phosphate 1
- mounting brackets
- installing on J4350 and J6350 1
- on J2320 and J2350 1
- multiple routers
- safe rack order 1, 2
N
- NEBS (Network Equipment Building System)
- identifying NEBS-compliant routers 1
- shutdown temperature for NEBS-compliant routers 1, 2
- network cable pinouts 1
- Network Equipment Building System See NEBS
- Network Time Protocol (NTP) server See NTP server
- Norton Ghost utility, for compact flash recovery 1
- notice icons 1
- NT1 device, provisioning information 1
- NTP server
- defining (configuration editor) 1
- defining (Quick Configuration) 1
- overview 1
O
- ONLINE LEDs
- ADSL PIM status 1
- channelized E1 ports 1
- channelized T1 ports 1
- G.SHDSL PIM status 1
- ISDN BRI PIM status 1
- overview
- J2320 1
- J2350 1
- J4350 1
- J6350 1
P
- packing materials
- packing a Services Router for shipment 1
- packing components for shipment 1
- saving 1
- parentheses, in syntax descriptions 1
- password See root password
- passwords
- root password, recovering 1
- PC See management device
- personnel warning 1
- physdiskwrite utility, for compact flash recovery 1
- PIC See PIMs
- PIM number, always 0 1
- PIMs (Physical Interface Modules)
- 4-Port Fast Ethernet 1
- 4-Port ISDN BRI 1
- ADSL 1
- cables and connectors 1
- Dual-Port Channelized T1/E1/ISDN PRI PIM 1
- Dual-Port E1 1
- Dual-Port Fast Ethernet 1
- Dual-Port Serial 1
- Dual-Port T1 1
- E3 1
- failure 1
- field-replaceable PIMs 1
- G.SHDSL 1
- Gigabit Ethernet ePIMs 1
- Gigabit Ethernet uPIMs 1
- heat dissipation 1
- installing 1
- installing cables 1
- LEDs See LEDs
- major (red) alarm 1
- midplane to Routing Engine 1, 2
- non-hot-swappability 1, 2, 3
- offline, troubleshooting 1
- overview 1
- PIM number, always 0 1, 2
- power consumption 1
- power management, planning 1
- power management, troubleshooting 1
- removing 1
- replacing cables 1
- serial number label 1
- slot numbering, J2320 and J2350 1
- slot numbering, J4350 and J6350 1
- T3 1
- pinouts
- ADSL RJ-11 connector 1
- chassis console DB-9 connector 1
- chassis console port 1
- EIA-530A DCE serial cable 1
- EIA-530A DTE serial cable 1
- Fast Ethernet connector 1
- Gigabit Ethernet connector (ePIM) 1
- Gigabit Ethernet connector (uPIMs) 1
- ISDN RJ-45 connector 1
- RJ-45 chassis console connector 1
- RJ-48 connector to DB-15 connector (crossover) 1
- RJ-48 connector to DB-15 connector (straight) 1
- RJ-48 connector to RJ-48 connector (crossover) 1
- RJ-48 connector to RJ-48 connector (straight) 1
- RS-232 DCE serial cable 1
- RS-232 DTE serial cable 1
- RS-422/449 (EIA-449) DCE serial cable 1
- RS-422/449 (EIA-449) DTE serial cable 1
- SHDSL RJ-11 connector 1
- V.35 DCE serial cable 1
- V.35 DTE serial cable 1
- X.21 DCE serial cable 1
- X.21 DTE serial cable 1
- plug types, AC 1
- ports
- 0 1
- ADSL See ADSL ports
- AUX 1, 2
- cables, PIM, installing 1
- cables, WAN, removing 1
- channelized See channelized E1 ports; channelized T1 ports
- console (chassis) 1, 2
See also console port
- DS1 See E1 ports; T1 ports
- DS3 See E3 ports; T3 ports
- E1 See E1 ports
- E3 See E3 ports
- G.SHDSL See SHDSL ports
- interface naming 1
- ISDN See ISDN BRI ports
- J2320 types supported 1
- J2350 types supported 1
- J4350 types supported 1
- J6350 types supported 1
- lo0.0 1
- serial See serial ports
- SHDSL See SHDSL ports
- T1 See T1 ports
- T3 See T3 ports
- USB 1, 2
- power
- AC power See AC power
- applying 1
- button 1, 2
- connecting 1
- consumption, PIMs 1
- DC power See DC power
- grounding requirement 1
- LED 1, 2
- managing 1
- power cables See DC power cables
- power cords See AC power cords
- power supplies See power supplies
- power system See power system
- removing 1
- requirements 1
- troubleshooting 1
- power button 1, 2
- power cables See DC power cables
- power cords See AC power cords
- POWER LED 1, 2
- power management
- planning 1
- troubleshooting 1
- power supplies
- J2320 1
- J2350 1
- J4350 1
- J6350 See power supplies, J6350
- LED states 1
- power supplies, J6350
- blank panel required in empty slot 1
- dedicated AC power feed requirement 1
- dedicated DC power feed requirement 1
- description 1
- installing AC 1
- installing DC 1
- LED states 1
- redundancy 1
- removing AC 1
- removing DC 1
- serial number label 1
- power system
- connecting 1, 2
- fan 1, 2
- J2320 1
- J4350 1
- J6350 1
- power supply LED 1
- preparing for installation 1
- product disposal 1
- product overview 1
- provisioning an ISDN line 1
Q
- Quick Configuration
- basic settings 1
- initial configuration 1
R
- rack installation
- general requirements 1
- lifting guidelines 1
- mounting brackets 1
- order of multiple routers 1, 2
- procedure 1, 2
- safety guidelines and warnings 1
- securing rack to building 1
- size requirements 1, 2
- support for front-mount rack 1, 2
- ventilation requirement 1, 2
- radio frequency interference (RFI), reducing 1
- ramp angle requirement 1
- read or write error, Routing Engine 1
- recovering compact flash See compact flash recovery
- red alarms See major alarms
- redundant J6350 power supplies
- description 1
- safety guidelines for power sources 1
- regulatory compliance 1
- remote connection to router console port
- configuring modem at router end 1
- configuring modem at user end 1
- connecting modem to router 1
- overview 1
- replacement
- AC power cord 1
- air filter 1
- console port cable (chassis) 1
- Crypto Accelerator Module 1, 2
- DC power cable 1
- DRAM modules 1
- external compact flash 1
- internal compact flash 1, 2
- PIM cables 1
- PIMs 1
- power system (J6350) 1
- tools and parts required 1
- USB storage device 1
- request chassis pic fpc-slot command 1
- reset
- power button for restart 1, 2
- RESET CONFIG button for factory configuration 1
- RESET CONFIG button
- for factory configuration 1
- Return Materials Authorization See RMA
- returning hardware 1
- packing a Services Router for shipment 1
- packing components for shipment 1
- procedure 1
- tools and parts required 1
- RJ-45 connector pinouts
- chassis console port 1
- Fast Ethernet port 1
- Gigabit Ethernet port (ePIM) 1
- Gigabit Ethernet port (uPIMs) 1
- RJ-45 to DB-9 serial port adapter 1
- chassis console port 1, 2
- RJ-48 connector to DB-15 connector (crossover) pinouts 1
- RJ-48 connector to DB-15 connector (straight) pinouts 1
- RJ-48 connector to RJ-48 connector (crossover) pinouts 1
- RJ-48 connector to RJ-48 connector (straight) pinouts 1
- RMA (Return Materials Authorization) 1
- number 1
- packing a Services Router for shipment 1
- packing components for shipment 1
- procedure 1
- tools and parts required 1
- rollover cable, connecting the console port 1
- root password
- at initial local connection (none) 1
- at initial remote connection (none) 1
- characteristics 1
- defining (cli wizard) 1
- defining (configuration editor) 1
- defining (Quick Configuration) 1
- required to commit a configuration 1
- root password recovery 1
- router See Services Router
- Routing Engine
- fan 1, 2
- fan failure 1
- J2320 functions and components 1
- J2350 functions and components 1
- J4350 functions and components 1
- J6350 functions and components 1
- major (red) alarm 1
- midplane to PIMs 1, 2
- minor (yellow) alarm 1
- read or write error 1
- too warm 1
- RS-232 DCE cable pinouts 1
- RS-232 DTE cable pinouts 1
- RS-422/449 (EIA-449) DCE cable pinouts 1
- RS-422/449 (EIA-449) DTE cable pinouts 1
S
- S/T port See ISDN BRI ports
- safety guidelines and warnings
- AC power 1
- battery handling 1
- DC power (general) 1
- DC power disconnection 1
- DC power wiring sequence warning 1
- DC power wiring terminations warning 1
- DC power, grounding requirements and warning 1
- DC power, redundant power supplies 1
- electrical 1
- general 1
- grounded equipment 1
- in case of electrical accident 1
- installation 1
- jewelry removal 1
- lasers and LEDs 1
- levels 1
- lightening activity 1
- maintenance and operation 1
- multiple power supplies 1
- operating temperature 1
- power disconnection 1
- product disposal 1
- rack-mounting 1
- ramps 1
- read installation instructions 1
- telecommunications cord 1
- TN power system 1
- safety standards 1
- fire safety 1
- sample configuration
- for basic connectivity 1
- serial number
- chassis components, label 1, 2
- PIMs 1
- power supply 1
- serial ports
- cables and connectors 1
- Dual-Port Serial PIM 1
- EIA-530A DCE pinouts 1
- EIA-530A DTE pinouts 1
- LED states 1
- RS-232 DCE pinouts 1
- RS-232 DTE pinouts 1
- RS-422/449 (EIA-449) DCE pinouts 1
- RS-422/449 (EIA-449) DTE pinouts 1
- V.35 DCE pinouts 1
- V.35 DTE pinouts 1
- X.21 DCE pinouts 1
- X.21 DTE pinouts 1
- service provider, contacting for ISDN provisioning 1
- Services Router
- backup 1
- clearance 1
- connecting 1
- establishing software connectivity 1
- grounding a DC-powered model 1
- grounding an AC-powered model 1
- hardware replacement 1
- hardware return 1
- installation and connection 1
- network cables and connectors 1
- operating environment 1
- overview 1
- packing for shipment 1
- PIM overview 1
- powering on and off 1
- preparation checklist 1
- safety and compliance 1
- site preparation 1
- unpacking 1
- Set Up page
- description 1
- setup
- configuration editor 1
- Quick Configuration 1
- requirements 1
- SFP Gigabit Ethernet ePIMs
- optical interface support 1
- overview 1
- SFPs supported 1
- SFP Gigabit Ethernet uPIMs
- optical interface support 1
- overview 1
- SHDSL ports
- description 1
- LED states on a G.SHDSL PIM 1
- RJ-11 connector pinouts 1
- shipping carton
- packing a Services Router for shipment 1
- packing components for shipment 1
- saving 1
- show chassis alarms command 1
- show chassis fpc pic-status command 1
- show chassis hardware command
- identifying NEBS-compliant routers 1
- locating component serial numbers 1
- verifying Crypto Accelerator Module installation 1, 2
- show chassis power-ratings command 1
- show chassis routing-engine command
- checking CPU temperature 1, 2
- checking DRAM amount 1, 2
- verifying DRAM installation and configuration 1
- shutdown
- graceful 1
- immediate 1
- temperature See shutdown temperature
- shutdown temperature
- NEBS-compliant routers 1, 2
- non-NEBS-compliant routers 1
- signaling limitations 1
- site preparation
- checklist 1
- electrical wiring guidelines 1
- fire safety 1
- for rack installation 1
- guidelines 1
- operating environment 1
- power requirements 1
- size
- J2320 1
- J2350 1
- J4350 1
- J6350 1
- requirements for rack installation 1, 2
- slot numbers, PIM
- chassis diagram 1, 2
- displayed as FPC number in command output 1
- small form-factor pluggable transceivers See SFP
- SNMP (Simple Network Management Protocol), no Gigabit Ethernet support 1, 2
- specifications
- AC electrical connection 1
- AC power cords 1
- DC electrical connection 1
- DC power cables 1
- electrical 1
- environmental 1
- grounding cable 1
- J2320 hardware 1
- J2350 hardware 1
- J4350 hardware 1
- J6350 hardware 1
- serial PIM cables and connectors 1
- SFP Gigabit Ethernet ePIM 1
- SFP Gigabit Ethernet uPIMs 1
- SSH
- defining (configuration editor) 1
- management access 1
- standards compliance 1
- startup
- Services Router 1
- standby power 1
- status
- router 1, 2
See also STATUS LEDs
- STATUS LEDs
- ADSL ports 1
- channelized E1 ports 1
- channelized T1 ports 1
- E1 ports 1
- E3 ports 1
- ISDN ports 1
- router status 1, 2
- serial ports 1
- SHDSL ports 1
- T1 ports 1
- T3 ports 1
- storage media
- recovering internal compact flash 1
- replacing the external compact flash 1
- replacing the internal compact flash 1, 2
- replacing the USB storage device 1
- support, technical See technical support
- SX transceiver
- Gigabit Ethernet ePIM 1
- Gigabit Ethernet uPIM 1
- symmetric high-speed digital subscriber line See SHDSL
- syntax conventions 1
- system time
- defining (Quick Configuration) 1
- overview 1
- synchronizing (configuration editor) 1
- synchronizing (Quick Configuration) 1
T
- T1 ports
- description 1
See also channelized T1 ports
- LED states 1
- RJ-48 cable pinouts 1
- T3 ports
- BNC connector pinouts 1
- description 1
- LED states 1
- technical support
- contacting JTAC 1
- contacting JTAC for hardware return 1
- information required for hardware return 1
- telecommunications line wire gauge 1
- Telnet
- management access 1
- temperature
- required for operation 1
- Routing Engine, too warm 1
- shutdown, NEBS-compliant routers 1, 2
- shutdown, non-NEBS-compliant routers 1
- warning 1
- temperature alarm, air filter replacement for 1
- terminology
- basic connectivity 1
- PIMs 1
- thermal output 1
- time See system time
- time zone 1
- defining (configuration editor) 1
- defining (Quick Configuration) 1
- TN power system 1
- tolerances, environmental 1
- tools and equipment
- for component replacement 1
- for hardware return 1
- troubleshooting
- root password recovery 1
- troubleshooting a Services Router, hardware components
- chassis alarm conditions 1
- offline PIMs 1
- power management 1
- turning on a Services Router 1
- TX/RX LED 1, 2, 3
- Type C fire extinguishers 1
U
- U port See ISDN BRI ports
- United States, compliance statements 1
- universal serial bus See USB
- unpacking the router 1
- uPIMs, Gigabit Ethernet See Gigabit Ethernet uPIMs
- URLs
- datasheets 1
- PIM information and datasheets 1
- return and repair policies 1
- support 1
- USB (universal serial bus)
- storage device, installing 1
- storage device, removing 1
- storage device, replacing 1
- USB port 1, 2
- utilities, for compact flash recovery 1
V
- V.35 DCE cable pinouts 1
- V.35 DTE cable pinouts 1
- ventilation requirement 1
- verification
- basic connectivity 1
W
- warnings
- battery handling 1
- DC power cables 1
- DC power disconnection 1
- DC power plant and chassis ground 1
- DC wiring sequence 1
- DC wiring terminations 1
- DC-powered J4350 and J6350 routers, restricted access installation only 1
- earthed mains socket (Norway and Sweden only) 1
- electrical 1
- ESD strap to prevent router damage 1
- follow lifting guidelines 1, 2
- general 1
- grounded equipment 1
- installation 1
- jewelry removal 1
- laser and LED 1
- levels defined 1
- lightening activity 1
- maintenance and operational 1
- multiple power supply disconnection 1
- operating temperature 1
- personnel 1
- power disconnection 1
- product disposal 1
- rack-mounting requirements 1
- ramp angle 1
- read installation instructions 1
- restricted access location for DC-powered routers 1, 2, 3, 4, 5
- rotating fans, compact flash replacement 1, 2
- safe rack order for multiple routers 1, 2
- telecommunications lines 1
- TN power system 1
- weight
- J2320 1
- J2350 1
- J4350 1
- J6350 1
- rack-mount requirements 1, 2
- WinZip utility, for compact flash recovery 1
- wire gauge
- for grounding cables 1
- for telecommunications lines 1
- wiring guidelines
- DC wiring sequence warning 1
- DC wiring terminations warning 1
- radio frequency interference (RFI) 1
- signaling limitations 1
- suppressing electromagnetic interference (EMI) 1
X
- X.21 DCE cable pinouts 1
- X.21 DTE cable pinouts 1