 |
Warning: Do not look directly into a fiber-optic transceiver or into the ends of fiber-optic cables. Fiber-optic transceivers and fiber-optic cable connected to a transceiver emit laser light that can damage your eyes. |
When removing and installing PICs that use fiber-optic cable on any routing platform, note the following guidelines:
|
Warning: Do not look directly into a fiber-optic transceiver or into the ends of fiber-optic cables. Fiber-optic transceivers and fiber-optic cable connected to a transceiver emit laser light that can damage your eyes. |
 |
Caution: Do not leave a fiber-optic transceiver uncovered except when inserting or removing cable. The safety cap keeps the port clean and prevents accidental exposure to laser light. |
When connecting and disconnecting cable at the ports on the PIC faceplate on any routing platform, note the following guidelines:
|
Caution: Do not let fiber-optic cable hang free from the connector. Do not allow fastened loops of cable to dangle, which stresses the cable at the fastening point. |
|
Caution: Secure cables in the cable management system so that they do not support their own weight. Use the cable management system to place excess cable out of the way in a neatly coiled loop. Placing fasteners on a loop helps to maintain its shape. |
|
Caution: Avoid bending fiber-optic cable beyond its minimum bend radius. An arc smaller than a few inches in diameter can damage the cable and cause problems that are difficult to diagnose. |
