The T640 routing node supports the following types of FPCs:
![]() |
Note: If you use one or more Enhanced Scaling FPC3s in a T640 routing node that is not part of a routing matrix, each SIB in the routing node must be a SIB version B. For more information, see the T640 Internet Routing Node Hardware Guide. |
![]() |
Note: If you use one or more FPC4s in a T640 routing node that is not part of a routing matrix, each SIB in the routing node must be a SIB version B. For more information, see the T640 Internet Routing Node Hardware Guide. |
T640 routing nodes support the FPCs listed in Table 6. You can install any combination of the following FPCs.
Table 6: FPCs Supported by the T640 Routing Node
The T640 routing node supports the standard FPC2 and FPC3 shown in Figure 21.
Figure 21: Standard FPC2 and FPC3 Supported by the T640 Routing Node

The T640 routing node supports the Enhanced II FPC1, FPC2 and FPC3 shown in Figure 22.
Figure 22: Enhanced II FPC1, FPC2 and FPC3 Supported by the T640 Routing Node

The T640 routing node supports the Enhanced Scaling FPC3 shown in Figure 23.
Figure 23: Enhanced Scaling FPC3 Supported by the T640 Routing Node

The T640 routing node supports the Enhanced Scaling FPC4 shown in Figure 24.
Figure 24: Enhanced Scaling FPC4 Supported by the T640 Routing Node
