Maintaining the M10i Routing Engine
Purpose
For optimum performance, verify the condition of the Routing Engine.
Action
- Check the LEDs on the Routing Engine. The green LED labeled ONLINE lights steadily when it is functioning normally. For more information about the LEDs, see M10i Routing Engine Description.
- Issue the CLI show chassis routing-engine command to check the status of the Routing Engines:
user@host> show chassis routing-engineRouting Engine status: Slot 0: Current state Master Election priority Master (default) Temperature 27 degrees C / 80 degrees F CPU temperature 27 degrees C / 80 degrees F DRAM 768 MB Memory utilization 45 percent CPU utilization: User 0 percent Background 0 percent Kernel 3 percent Interrupt 0 percent Idle 97 percent Model RE-5.0 Serial ID 1000647001 Start time 2009-01-28 14:11:50 PST Uptime 21 hours, 51 minutes, 16 seconds Load averages: 1 minute 5 minute 15 minute 0.00 0.02 0.00 Routing Engine status: Slot 1: Current state Backup Election priority Backup (default) Temperature 26 degrees C / 78 degrees F CPU temperature 27 degrees C / 80 degrees F DRAM 1536 MB Memory utilization 23 percent CPU utilization: User 0 percent Background 0 percent Kernel 0 percent Interrupt 0 percent Idle 99 percent Model RE-850 Serial ID 1000648260 Start time 2009-01-28 16:18:12 PST Uptime 19 hours, 44 minutes, 51 seconds
For further description of the output from the command, see the Junos System Basics and Services Command Reference.
