• Downloads
• Maintaining Port Modules on the SRX5600 Services Gateway    

• Related Topics
• Routine Maintenance Procedures for the SRX5600 Services Gateway
• Maintaining the Air Filter on the SRX5600 Services Gateway
• Maintaining the Fan Tray on the SRX5600 Services Gateway
• Maintaining the SRX5600 Services Gateway Host Subsystem and SCBs
• Maintaining SPCs, IOCs, and Flex IOCs on the SRX5600 Services Gateway
• Maintaining SRX5600 Services Gateway Network Cables
• Maintaining SRX5600 Services Gateway Power Supplies

Maintaining Port Modules on the SRX5600 Services Gateway

Purpose

For optimum services gateway performance, verify the condition of the port modules installed in Flex IOCs.

Action

On a regular basis:

• Check the LEDs on port modules faceplates. The meaning of the LED states differs for various port modules. If the Flex IOC that houses the port modules detects a port modules failure, the Flex IOC generates an alarm message to be sent to the Routing Engine.
• Issue the CLI show chassis fpc pic-status command. The port modules slots in an FPC are numbered from 0 through 1, left to right:
  
  

  user@host> show chassis fpc pic-status

  Slot 0   Online       SRX5k SPC
    PIC 0  Online       SPU Cp-Flow
    PIC 1  Online       SPU Flow
  Slot 3   Online       SRX5k DPC 4X 10GE
    PIC 0  Online       1x 10GE(LAN/WAN) RichQ
    PIC 1  Online       1x 10GE(LAN/WAN) RichQ
    PIC 2  Online       1x 10GE(LAN/WAN) RichQ
    PIC 3  Online       1x 10GE(LAN/WAN) RichQ
  Slot 5   Online       SRX5k FIOC
    PIC 0  Online       16x 1GE TX
    PIC 1  Online       4x 10GE XFP

  For further description of the output from the command, see the JUNOS System Basics and Services Command Reference.