Technical Documentation

Maintaining the SRX5800 Services Gateway Host Subsystem and SCBs

Purpose

For optimum services gateway performance, verify the condition of the host subsystem and any additional SCBs. The host subsystem comprises an SCB and a Routing Engine installed into a slot in the SCB.

Action

On a regular basis:

  • Check the LEDs on the craft interface to view information about the status of the Routing Engines.
  • Check the LEDs on the SCB faceplate.
  • Check the LEDs on the Routing Engine faceplate.
  • To check the status of the Routing Engine, issue the show chassis routing-engine command. The output is similar to the following:

    user@host> show chassis routing-engine
    Routing Engine status:
  Slot 0:
    Current state                  Master
    Election priority              Master (default)
    Temperature                 36 degrees C / 96 degrees F
    CPU temperature             33 degrees C / 91 degrees F
    DRAM                      2048 MB
    Memory utilization          12 percent
    CPU utilization:
      User                       1 percent
      Background                 0 percent
      Kernel                     4 percent
      Interrupt                  0 percent
      Idle                      94 percent
    Model                          RE-S-1300
    Serial ID                      1000697084
    Start time                     2008-07-11 08:31:44 PDT
    Uptime                         3 hours, 27 minutes, 27 seconds
    Load averages:                 1 minute   5 minute  15 minute
                                       0.44       0.16       0.06
  • To check the status of the SCBs, issue the show chassis environment cb command. The output is similar to the following:

    user@host> show chassis environment cb
    CB 0 status:
  State                      Online Master
  Temperature                40 degrees C / 104 degrees F
  Power 1
    1.2 V                     1208 mV
    1.5 V                     1521 mV
    1.8 V                     1807 mV
    2.5 V                     2507 mV
    3.3 V                     3319 mV
    5.0 V                     5033 mV
    12.0 V                   12142 mV
    1.25 V                    1243 mV
    3.3 V SM3                 3312 mV
    5 V RE                    5059 mV
    12 V RE                  11968 mV
  Power 2
    11.3 V bias PEM          11253 mV
    4.6 V bias MidPlane       4814 mV
    11.3 V bias FPD          11234 mV
    11.3 V bias POE 0        11176 mV
    11.3 V bias POE 1        11292 mV
  Bus Revision               42
  FPGA Revision              1
CB 1 status:
  State                      Online Standby
  Temperature                40 degrees C / 104 degrees F
  Power 1
    1.2 V                     1202 mV
    1.5 V                     1514 mV
    1.8 V                     1807 mV
    2.5 V                     2500 mV
    3.3 V                     3293 mV
    5.0 V                     5053 mV
    12.0 V                   12200 mV
    1.25 V                    1260 mV
    3.3 V SM3                 3319 mV
    5 V RE                    5059 mV
    12 V RE                  12007 mV
  Power 2
    11.3 V bias PEM          11311 mV
    4.6 V bias MidPlane       4827 mV
    11.3 V bias FPD          11330 mV
    11.3 V bias POE 0        11292 mV
    11.3 V bias POE 1        11311 mV
  Bus Revision               42
  FPGA Revision              1

To check the status of a specific SCB, issue the show chassis environment cb command and include the slot number of the SCB—for example, show chassis environment cb 0.

For more information about using the CLI, see the JUNOS Software manuals.

Published: 2009-11-03