• Supported Platforms
• TX Matrix Plus Routers

• Related Topics
• TX Matrix Plus Cooling System Overview
• TX Matrix Plus Craft Interface Overview
• Fan Tray LEDs on the TX Matrix Plus Craft Interface
• TX Matrix Plus Clearance Requirements for Airflow and Hardware Maintenance
• Troubleshooting the TX Matrix Plus Cooling System

Maintaining the Fan Trays

Purpose

For optimum cooling, verify the status of the fans.

Note: The speed of the fans in the rear fan tray of a T1600 router is affected by the temperature of the TXP-T1600 SIB main board (displayed as SIB n ), not by the temperature of the TXP-T1600 SIB mezzanine board [displayed as SIB n (B)].

Action

On a regular basis:

• Look at the LCD display on the craft interface to view information about the TX Matrix Plus router temperature.
• Issue the show chassis temperature-thresholds commands.
• Display the status of the fans in the TX Matrix Plus router. Issue the show chassis environment sfc 0 command.
• Display the status of the fans in the routing matrix (TX Matrix Plus router and all T1600 routers). Issue the show chassis environment command.
• Display the status of the fans in a specific T1600 router. Issue the show chassis environment lcc lcc-number command, where lcc-number is the chassis ID of the router and can be from 0 through 3.