- Related Topics
- Monitoring the SRX100 Services Gateway Components Using LEDs
- Monitoring the SRX100 Services Gateway Using Chassis Alarm Conditions
- Monitoring the SRX100 Services Gateway Power System
- Maintaining the SRX100 Services Gateway Hardware Components
- Using the Reset Config Button on the SRX100 Services Gateway
- Juniper Networks Technical Assistance Center
Monitoring the SRX100 Services Gateway Chassis Using the CLI
You can monitor alarms to troubleshoot hardware problems on a services gateway. The chassis properties include the status of active chassis alarms on the device and the environmental measurements of the device.
To view these chassis properties, select Monitor>Chassis in the J-Web interface, or enter the following CLI show commands:
- show chassis hardware
- show chassis environment
- show chassis fpc
- show chassis alarms
- show chassis hardware detail
Examples:
The following examples provide the sample output of commands:
- show chassis hardware
user@host > show chassis hardware
Item Version Part number Serial number Description Chassis AU0209AF0022 SRX100h Routing Engine REV 00 750-02177 BAAA0083 RE-SRX100-HM FPC 0 FPC PIC 0 8x FE Base PIC Power Supply 0
- show chassis environment
user@host > show chassis environment
Class Item Status Measurement Temp Routing Engine OK 43 degrees C / 109 degrees F Power Power Supply 0 OK
- show chassis fpc
user@host > show chassis fpc
Temp CPU Utilization (%) Memory Utilization (%) Slot State (C) Total Interrupt DRAM (MB) Heap Buffer 0 Online -------------------- CPU less FPC --------------------
- show chassis alarms
user@host > show chassis alarms
No alarms currently active
- show chassis hardware detail
user@host > show chassis hardware detail
Item Version Part number Serial number Description Chassis AU0809AF0003 SRX100h Routing Engine REV 00 750-02177 BAAA0116 RE-SRX100-HM da0 999 MB ST72682 Nand Flash usb0 <addr 1> DWC OTG root hub 0 vendor 0x0000 uhub0 usb0 <addr 2> product 0x005a 90 vendor 0x0409 uhub1 usb0 <addr 3> ST72682 High Speed Mode 64218 STMicroelectronics umass0 FPC 0 FPC PIC 0 8x FE Base PIC Power Supply 0
Note: The values given in the usb0 rows provide information for USB level debugging. This information is about USB hub topology.
