• Downloads
• Maintaining the Routing Engine on the SRX3600 Services Gateway    

• Related Topics
• Required Tools and Parts for Maintaining the SRX3600 Services Gateway Hardware Components
• SRX3600 Services Gateway Switch Fabric Board
• SRX3600 Services Gateway Routing Engine
• Routine Maintenance Procedures for the SRX3600 Services Gateway
• Maintaining the Air Filter on the SRX3600 Services Gateway
• Maintaining the Fan Tray on the SRX3600 Services Gateway
• Maintaining the Power Supplies on the SRX3600 Services Gateway

Maintaining the Routing Engine on the SRX3600 Services Gateway

The host subsystem comprises a Routing Engine installed directly into the midplane. To maintain the host subsystem components, follow these guidelines:

• Check the LEDs on the SFB faceplate.
• Check the LEDs on the Routing Engine faceplate.
• To check the status of the Routing Engine, issue the show chassis routing-engine command. The output is similar to the following:
  
  

  user@host> show chassis routing-engine

  Routing Engine status:
    Slot 0:
      Current state                  Master
      Election priority              Master (default)
      DRAM                      1023 MB
      Memory utilization          34 percent
      CPU utilization:
        User                       0 percent
        Background                 0 percent
        Kernel                     3 percent
        Interrupt                  0 percent
        Idle                      96 percent
      Model                          RE-PPC-1200-A
      Start time                     2010-04-05 14:01:33 PDT
      Uptime                         47 minutes, 48 seconds
      Last reboot reason             Router rebooted after a normal shutdown.
      Load averages:                 1 minute   5 minute  15 minute
                                         0.04       0.04       0.05

• To check the status of the SFB, issue the show chassis environment cb command. The output is similar to the following:
  
  

  user@host> show chassis environment cb

  CB 0 status:
    State                      Online Master
    Temperature                37 degrees C / 98 degrees F
    Power 1
      1.0 V                      982 mV
      1.1 V                     1057 mV
      1.2 V                     1169 mV
      1.25 V                    1214 mV
      1.5 V                     1450 mV
      1.8 V                     1753 mV
      2.5 V                     2449 mV
      3.3 V                     3248 mV
      3.3 V bias                3296 mV
      5.0 V                     4975 mV
      12.0 V                   11640 mV
    Bus Revision               108
    FPGA Revision              0
  

For more information about using the CLI, see the JUNOS Software manuals.