Technical Documentation

Monitoring the SRX100 Services Gateway Power System

The LEDs on the services gateway enable you to determine the performance and operation. The Power LED, located on the front panel of the services gateway, indicates the different settings with respect to the power system.

Table 1 describes different Power LED status settings and their corrective actions.

Table 1: Services Gateway Power LED Status

LED Status

Meaning

Possible Cause and Corrective Action

Green

Device is receiving power, and the internal power supply is functional.

Normal indication. No action is required.

Amber

Indicates that the power button has been pressed and quickly released.

Normal indication. No action is required.

Off

Indicates that the device is not receiving power.

  • Verify that the AC power cord from the power source to the device is not damaged. If the insulation is cracked or broken, immediately replace the cord or cable.
  • Ensure that the socket you plug in is in working condition.
  • Ensure the device has an AC input voltage between 100 and 240 VAC.
  • If you cannot determine the cause of the problem or need additional assistance, see Juniper Networks Technical Assistance Center.

Published: 2010-04-27