- Related Topics
- Installing the SRX240 Services Gateway
- Required Tools and Parts for Installing and Maintaining the SRX240 Services Gateway
- Connecting and Organizing Interface Cables to the SRX240 Services Gateway
- Grounding the SRX240 Services Gateway
- Powering On and Powering Off the SRX240 Services Gateway
Connecting the SRX240 Services Gateway to the AC Power Source
Figure 1 shows the SRX240 Services Gateway power supply connection.
Figure 1: SRX240 Services Gateway Power Supply Connection
To connect the device to the power supply:
- Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the other end of the ESD strap to the ESD point on the rack.
- Insert the appliance coupler end of a power cord into the appliance inlet on the power supply faceplate.
- Insert the plug into an AC power source receptacle.
 | Note: The device must be connected to earth ground during normal operation. The protective earthing terminal on the rear of the chassis is provided to connect the device to ground. |
 | Caution: We recommend using a surge protector for the power connection. |
| Note: Use the cable tie holder to secure the power cord on to the power supply point. |
| Note: We strongly recommend that you use only the 3-pin power cord supplied with your services gateway. If you are using a 2-pin power cord, then ensure that your device is adequately grounded using the grounding point available on back panel of chassis. |
