- Related Topics
- Site Preparation Checklist for the SRX100 Services Gateway
- Unpacking the SRX100 Services Gateway
- Clearance Requirements for Airflow and Hardware Maintenance of the SRX100 Services Gateway
- Preparing the SRX100 Services Gateway for Rack-Mount Installation
- Preparing the SRX100 Services Gateway for Desk-Mount Installation
Preparing the SRX100 Services Gateway for Wall-Mount Installation
You can mount an SRX100 Services Gateway on a wall. The four rubber feet attached to the chassis provide stability.
Before mounting an SRX100 Services Gateway on a wall:
- Verify that the site meets the requirements described in Site Preparation Checklist for the SRX100 Services Gateway.
- Remove the services gateway chassis from the shipping carton. For unpacking instructions, see Unpacking the SRX100 Services Gateway.
- Verify that you have the following parts available in
your wall-mounting kit for the SRX100 Services Gateway:
- Wall-mounting brackets
- Screws
 | Note: The wall-mounting kit is not shipped with the device and must be ordered separately. |
