Verifying the TX Matrix Parts Received
The main shipment contains the TX Matrix chassis with installed components, and an accessory box. A packing list is included in each shipment. Check the parts in the shipment against the items on the packing list. The packing list specifies the part numbers and descriptions of each part in your order.
To verify that the TX Matrix parts have been received:
- Verify that all the parts in the main shipment (Table 1), which contains the TX Matrix chassis with installed components, have been received.
- Verify that all the parts in the accessory box (Table 2) have been received.
- If any part is missing, contact a customer service representative.
Table 1: TX Matrix Router Parts List
Component | Quantity |
|---|---|
Chassis, including midplane, craft interface, and center-mounting brackets | 1 |
Comb panel assembly | 1 |
TX-SIBs | 5 |
Routing Engines | 1 or 2 |
TX-CBs | 1 or 2 |
Power supplies | 2 |
TX-CIP | 2 |
Front fan trays | 2 |
Rear fan tray | 1 |
Quick Start installation guide | 1 |
Front mounting shelf | 1 |
Rear mounting shelf | 1 |
Spacer bars | 2 |
Blank panels for slots without components installed | One blank panel for each slot not occupied by a component |
Table 2: Accessory Box Parts List
Part | Quantity |
|---|---|
2.5-mm ball hex driver for the fiber-optic array loopback adapter and loopback connector | 1 |
7/16-in. (11 mm) nut driver or socket wrench | 1 |
Affidavit for T1 connection | 1 |
Connectors for alarm relay cables | 2 |
DB-9 (male) to DB-25 (female) adapter | 1 |
DC power and grounding cable lugs | 9 (8 for power, 1 for grounding) |
ESD wrist strap with cable | 1 |
Fiber-optic array loopback connector | 1 |
Fiber-optic array loopback adapter | 1 |
Flat-blade (–) screwdriver, number 1, for the fiber-optic array cable connectors | 1 |
Labels for the fiber-optic array cable connectors | 1 |
PCMCIA card holder and hook-and-loop fasteners (male and female) | 1 of each |
Phillips (+) screwdriver, number 2 | 1 |
Read-me-first document | 1 |
Screws to fasten grounding cable to chassis | 2 |
Screws to mount chassis | Bag of 14 |
Serial cable, 6-ft length, to connect Routing Engine to management console | 1 |
Software license agreement | 1 |
Ethernet cable, 15-ft length, to connect Routing Engine to management device | 1 |
Washers for grounding cable lug | 2 |
