Upgrading the JUNOS Software on the T1600 Routers in a Routing Matrix
Before you can use the TX Matrix Plus router to manage or configure a T1600 router in a routing matrix, you must upgrade the router to the JUNOS Release 9.6R2 or later. Upgrading and integrating an operational T1600 router requires JUNOS Release 10.1 or later.
To upgrade the software, you use CLI commands to copy a set of software images over the network to memory storage on the Routing Engine. The JUNOS Software set consists of several images provided in individual packages or as a bundle. You normally upgrade all packages simultaneously.
To upgrade the software:
- Upgrade the JUNOS Software running on the T1600
router.
For information about installing and upgrading JUNOS Software, see the Routing Matrix with a TX Matrix Plus Router Feature Guide and JUNOS Software Installation and Upgrade Guide.
- After you are satisfied that the new packages are
successfully installed and running, issue the request system snapshot command to back up the new software.
For more information, see the JUNOS System Basics Configuration Guide.
