Verifying the SRX5800 Services Gateway Parts Received
A packing list is included in each shipment. Check the
parts in the shipment against the items on the packing list. The packing
list specifies the part numbers and descriptions of each part in your
order.
If any part is missing, contact a customer service representative.
A fully configured services gateway contains the services gateway
chassis with installed components, listed in Table 1, and an accessory box, which contains
the parts listed in Table 2. The parts
shipped with your services gateway can vary depending on the configuration
you ordered.
Table 1: Parts
List for a Fully Configured Services Gateway
Component
|
Quantity
|
Chassis, including midplane, craft
interface, and rack-mounting brackets
|
1
|
IOCs
|
Up to 11
|
SPCs
|
Up to 11
|
Routing Engines
|
1 or 2
|
SCBs
|
Up to 3
|
Power supplies
|
Up to 4
|
Fan trays
|
2
|
Air filter
|
1
|
Air filter tray
|
1
|
Getting Started Guide
|
1
|
Large mounting shelf
|
1
|
Small mounting shelf
|
1
|
Blank panels for slots without
components installed
|
One blank panel for each slot not occupied
by a component
|
Table 2: Accessory
Box Parts List
Part
|
Quantity
|
Screws to mount chassis
|
14
|
DC power terminal Lugs, 6-AWG
|
8
|
RJ-45 cable, with RJ-45 Jack to Female DB-9, to connect
the device through the serial port
|
1
|
Terminal block plug, 3 pole, 5.08 mm spacing, 12A, to
connect the device alarms
|
2
|
Label, accessories contents, SRX5800
|
1
|
USB flash drive with JUNOS
|
1
|
Read me first document
|
1
|
Affidavit for T1 connection
|
1
|
Juniper Networks Product Warranty
|
1
|
End User License Agreement
|
1
|
Document sleeve
|
1
|
3" x 5" pink bag
|
2
|
9" x 12" pink bag, ESD
|
2
|
Accessory Box, 19 x 12 x 3"
|
1
|
Ethernet cable, RJ-45/RJ-45, 4-pair stranded UTP, Category
5E, 15'
|
1
|
ESD wrist strap with cable
|
1
|
Published: 2009-11-03
