• Downloads
• Installing the SRX5800 Services Gateway Mounting Hardware for Center-Mounting in an Open-Frame Rack    

• Related Topics
• Overview of Installing the SRX5800 Services Gateway
• Site Preparation Checklist for the SRX5800 Services Gateway
• Installing the SRX5800 Services Gateway Mounting Hardware for a Four-Post Rack or Cabinet
• Tools Required to Install the SRX5800 Services Gateway with a Mechanical Lift
• Installing the SRX5800 Services Gateway Mounting Hardware for Front-Mounting in an Open-Frame Rack
• Installing the SRX5800 Services Gateway Using a Mechanical Lift

Installing the SRX5800 Services Gateway Mounting Hardware for Center-Mounting in an Open-Frame Rack

If you are installing the services gateway in a center-mount open-frame rack, you must install the large mounting shelf on the rack.

specifies the holes in which you insert screws to install the mounting hardware in an open-frame rack (an X indicates a mounting hole location). The hole distances are relative to one of the standard “U” divisions on the rack. For reference, the bottom of all mounting shelves is at 0.04 in. (0.02 U) above a “U” division.

To install the large mounting shelf (see ):

1. On the rear of each rack rail, partially insert a mounting screw into the highest hole specified in for the large shelf.
2. Install the large shelf on the rack. Hang the shelf over the mounting screws using the keyhole slots located near the top of the large shelf flanges.
3. Partially insert screws into the open holes in the ears of the large shelf.
4. Tighten all the screws completely.