Verifying the SRX5600 Services Gateway Parts Received
A packing list
is included in each shipment. Check the parts in the shipment against
the items on the packing list. The packing list specifies the part
numbers and descriptions of each part in your order.
If any part is missing, contact a customer service representative.
A fully configured services gateway contains the chassis with
installed components, listed in Table 1, and an accessory box, which contains the parts listed in Table 2. The parts shipped with your device
can vary depending on the configuration you ordered.
Table 1: Parts
List for a Fully Configured Services Gateway
Component
|
Quantity
|
Chassis, including midplane, craft
interface, and rack-mounting brackets
|
1
|
IOCs
|
Up to 5
|
SPCs
|
Up to 5
|
Routing Engines
|
1 or 2
|
SCBs
|
1 or 2
|
Power supplies
|
Up to 4
|
Fan tray
|
1
|
Air filter
|
1
|
Air filter tray
|
1
|
Getting Started Guide
|
1
|
Small mounting shelf
|
1
|
Blank panels for slots without
components installed
|
One blank panel for each slot not occupied
by a component
|
Table 2: Accessory
Box Parts List
Part
|
Quantity
|
Screws to mount chassis and small shelf
|
22
|
DC power terminal Lugs, 6-AWG
|
8
|
RJ-45-to-DB-9 cable to connect the device through the
serial port
|
1
|
Cable manager brackets
|
2
|
Terminal block plug, 3–pole, 5.08 mm spacing, 12A,
to connect the device alarms
|
2
|
Label, accessories contents, SRX5600
|
1
|
USB flash drive with JUNOS
|
1
|
Read me first document
|
1
|
Affidavit for T1 connection
|
1
|
Juniper Networks Product Warranty
|
1
|
End User License Agreement
|
1
|
Document sleeve
|
1
|
3 in. x 5 in. pink bag
|
2
|
9 in. x 12 in. pink bag, ESD
|
2
|
Accessory Box, 19 in. x 12 in. x 3 in.
|
1
|
Ethernet cable, RJ-45/RJ-45, 4-pair stranded UTP, Category
5E, 15'
|
1
|
ESD wrist strap with cable
|
1
|
Published: 2009-11-03
