Adjusting the Power Supply Adapter Tray for the SRX210 Services Gateway for Rack-Mount Installation
This topic provides details on the power supply adapters provided with different models of the SRX210 Services Gateway and the procedure for adjusting the power supply adapter tray to hold the power supply adapter.
The following power supply adapters are provided with the SRX210 Services Gateway:
- 60-watt power supply adapter for the SRX210 Services Gateway Low Memory and High Memory models
- 150-watt power supply adapter for the SRX210 Services Gateway with PoE and the SRX210 Services Gateway with Integrated Convergence Services
To adjust the power supply adapter tray:
- To accommodate the 60-watt power supply, use the two 420–028535
screws to attach the adapter stopper brackets at the point on the
chassis marked B.
Figure 1 shows the adjustments to the power supply adapter tray required for the 60-watt power supply.
Figure 1: Adjusting the Power Supply Adapter Tray to Accommodate the 60-Watt Power Supply
- Locations for the adapter stopper brackets in the power supply adapter tray
- Fully configured power supply adapter tray
- To accommodate the 150-watt power supply, use the 420–028535
screw to attach the adapter stopper bracket at the point on the chassis
marked A.
Figure 2 shows the adjustments to the power supply adapter tray required for the 150-watt power supply.
Figure 2: Adjusting the Power Supply Adapter Tray to Accommodate the 150-Watt Power Supply
- Locations for the adapter stopper brackets in the power supply adapter tray
- Fully configured power supply adapter tray
