• Downloads
• Installing the SRX100 Services Gateway on a Desk    

• Related Topics
• Required Tools and Parts for Installing and Maintaining the SRX100 Services Gateway
• Preparing the SRX100 Services Gateway for Desk-Mount Installation
• SRX100 Services Gateway Safety Requirements, Warnings, and Guidelines
• Installing the SRX100 Services Gateway in a Rack
• Installing the SRX100 Services Gateway on a Wall

Installing the SRX100 Services Gateway on a Desk

You can install the SRX100 Services Gateway on a desk, table, or other level surface. The device is shipped with the rubber feet attached. The rubber feet are necessary to stabilize the device on the desk.

You can install the device in a horizontal or vertical position.

Note: The desk-mounting kit is not shipped with the device and must be ordered separately.

Horizontal Desk Mounting

The horizontal position is the standard installation position and does not require the vertical installation kit.

To install the device in a horizontal position:

1. Make sure that the rubber feet are attached to the chassis.
2. Place the device on a desk with the Juniper Networks logo embossed on the top cover facing up.

Vertical Desk Mounting

The vertical position requires the vertical installation kit, which consists of a vertical installation stand.

To install the device in a vertical position:

1. Place the device on a flat and level surface with the Juniper Networks logo on the front panel facing up, as shown in Figure 1.

   Figure 1: Installing the SRX100 Services Gateway on a Desk

   

2. Attach the vertical stand to the right side of the chassis as shown in Figure 1.
3. Place the chassis vertically on the desk with the stand resting on the desk.