• Supported Platforms
• M7i Routers

• Related Topics
• Fiber-Optic and Network Cable Specifications for the M7i Router
• M7i Chassis Description
• FIC Specifications for the M7i Router
• Replacing the Management Ethernet Cable

Replacing the Console or Auxiliary Cable

If a cable is already connected to the CONSOLE or AUX/MODEM port, follow these steps to remove it:

1. Turn off the power to the console or auxiliary device.
2. Unscrew the screws that secure the cable connector to the port, using a 2.5-mm flat-blade screwdriver if necessary.
3. Pull the cable connector straight out of the port.
4. Disconnect the cable from the console or auxiliary device.

To connect the new cable, follow these steps:

1. Plug the female end of the replacement serial cable into the CONSOLE or AUX/MODEM port (see Replacing the Management Ethernet Cable).
2. Tighten the screws on the connector.
3. Power on the auxiliary or console device.