• Supported Platforms
• M7i Routers

• Related Topics
• Fiber-Optic and Network Cable Specifications for the M7i Router
• M7i Chassis Description
• FIC Specifications for the M7i Router
• Replacing the Console or Auxiliary Cable

Replacing the Management Ethernet Cable

To replace the management Ethernet cable:

1. Press the tab on the connector on the management Ethernet cable and pull the connector straight out of the port. Figure 1 shows the connector.
2. Disconnect the cable from the network device.
3. Plug one end of the replacement Ethernet cable into the MGMT port (see Figure 2).
4. Plug the other end of the cable into the network device.